Treatment surfaces with atomic oxygen excited in dielectric barrier discharge plasma of O{sub 2} admixed to N{sub 2}

• Published in: AIP advances Vol. 2; no. 2
• Main Authors: Shun'ko, E. V., Belkin, V. S.
• Format: Journal Article
• Language: English
• Published: United States 15-06-2012
• Subjects: 70 PLASMA PHYSICS AND FUSION TECHNOLOGY; CERAMICS; CROSS SECTIONS; CYLINDRICAL CONFIGURATION; DISSOCIATION; ELECTRODES; EXCITATION; MATERIALS SCIENCE; OXYGEN; PLASMA SHEATH; POLYMERS; SUBSTRATES; SURFACE ENERGY; SURFACE TREATMENTS; SURFACES; TUBES
• ISSN: 2158-3226; 2158-3226
• DOI: 10.1063/1.4732120

This paper describes the increase in surface energy of substrates by their treatment with gas composition generated in plasmas of DBD (Dielectric Barrier Discharge) in O2 admixed with N2. Operating gas dissociation and excitation was occurred in plasmas developed in two types of reactors of capacitively-coupled dielectric barrier configurations: coaxial cylindrical, and flat rectangular. The coaxial cylindrical type comprised an inner cylindrical electrode encapsulated in a ceramic sheath installed coaxially inside a cylindrical ceramic (quartz) tube passing through an annular outer electrode. Components of the flat rectangular type were a flat ceramic tube of a narrow rectangular cross section supplied with two flat electrodes mounted against one another outside of the long parallel walls of this tube. The operating gas, mixture of N{sub 2} and O{sub 2}, was flowing in a completely insulated discharge gap formed between insulated electrodes of the devices with an average velocity of gas inlet of about 7 to 9 m/s. Dielectric barrier discharge plasma was excited in the operating gaps with a bipolar pulse voltage of about 6 kV for 2 ms at 50 kHz repetition rate applied to the electrodes of the coaxial device, and of about 14 kV for 7 ms at 30 kHz repetition rate for the flat linear device. A lifetime of excited to the 2s{sup 2}2p{sup 4}({sup 1}S{sub 0}) state in DBD plasma and streaming to the surfaces with a gas flow atomic oxygen, responsible presumably for treating surfaces, exceeded 10 ms in certain cases, that simplified its separation from DBD plasma and delivery to substrates. As it was found in particular, surfaces of glass and some of polymers revealed significant enhancement in wettability after treatment.