Parallel plate Transmission Line Transformer

• Published in: 2011 IEEE Pulsed Power Conference pp. 303 - 306
• Main Authors: Voeten, S. J., Vermeulen, M. F. J., Brussaard, G. J. H., Pemen, A. J. M.
• Format: Conference Proceeding
• Language: English
• Published: IEEE 01-06-2011
• Subjects: Conductors; Gain measurement; Impedance; Power transmission lines; Reflection; Transmission line measurements; Voltage measurement
• ISBN: 9781457706295; 1457706296
• ISSN: 2158-4915; 2158-4923
• DOI: 10.1109/PPC.2011.6191434

A Transmission Line Transformer (TLT) can be used to transform high-voltage nanosecond pulses. These transformers rely on the fact that the length of the pulse is shorter than the transmission lines used. This allows connecting the transmission lines in parallel at the input and in series at the output. In the ideal case such structures achieve a voltage gain which equals the number of transmission lines used. To achieve maximum efficiency, mismatch and secondary modes must be suppressed. Here we describe a TLT based on parallel plate transmission lines. The chosen geometry results in a high efficiency, due to good matching and minimized secondary modes. A second advantage of this design is that the electric field strength between the conductors is the same throughout the entire TLT. This makes the design suitable for high voltage applications. To investigate the concept of this TLT design, measurements are done on two different TLT designs. One TLT consists of 4 transmission lines, while the other one has 8 lines. Both designs are constructed of DiBond™. This material consists of a flat polyethylene inner core with an aluminum sheet on both sides. Both TLT's have an input impedance of 3.125 Ω. Their output impedances are 50 and 200 Ω, respectively. The measurements show that, on a matched load, this structure achieves a voltage gain factor of 3.9 when using 4 transmission lines and 7.9 when using 8 lines.