Hybrid PV/T enhancement using selectively absorbing Ag–SiO2/carbon nanofluids

• Published in: Solar energy materials and solar cells Vol. 147; pp. 281 - 287
• Main Authors: Hjerrild, Natasha E., Mesgari, Sara, Crisostomo, Felipe, Scott, Jason A., Amal, Rose, Taylor, Robert A.
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01-04-2016
• Subjects: Beam splitting; Carbon nanotube; Core–shell nanoparticle; Nanofluid; Optical filter; Solar energy; Carbon nanotube; Beam splitting; Optical filter; Nanofluid; Solar energy; Core–shell nanoparticle
• ISSN: 0927-0248; 1879-3398
• DOI: 10.1016/j.solmat.2015.12.010

Optical filters can be used to increase solar conversion efficiency in hybrid photovoltaic/thermal (PV/T) collectors by partitioning incident light into two spectra: one desirable for direct electrical conversion and one for thermal collection. This article is the first to present both modeled and experimental results for a spectrally-tailorable, multi-particle nanofluid filter positioned between a concentrated light source and a silicon cell. The nanofluid is composed of suspended core–shell silver-silica (Ag–SiO2) nanodiscs and carbon nanotubes (CNTs) in water. The core–shell particles were specifically synthesized and designed to absorb the majority of the visible spectrum, while transmitting the light which corresponds to the PV cell. The silver nanodiscs strongly absorb visible light with minimal scattering, whereas the silica shell maintains the shape and absorption spectrum of the silver cores. Alternatively, low-concentration carbon nanotube (CNT) solutions were used to enhance absorption (particularly of ultra-violet light) and to provide a comparison for selective filters versus broadband absorbers. Varying dilutions of the Ag–SiO2 nanofluid are compared to solutions diluted with dispersed CNTs. The CNTs enhance the heating rate of the nanofluid with the caveat of non-selective light absorption, which reduces the electrical output. Ag–SiO2 nanofluids (0.026wt%) increased combined efficiencies by 30% compared to the base fluid filter alone. For a small additional cost of <$1/L of nanofluid, the developed system represents a highly efficient hybrid generator which can be dynamically tailored to meet variable thermal energy and electricity prices.
[Display omitted]
•Selectively absorbing nanofluids were fabricated for hybrid PV/thermal collectors.•Core–shell silver-silica nanodiscs and carbon nanotubes were suspended in water.•Temperature and photocurrent were measured for fluid filters and silicon PV.•A merit function was used to evaluate the combined power output for nanofluids.•Optical efficiencies of up to 58% can be achieved for <$1/L of nanofluid.