Numerical Simulation of Output Response of PVDF Sensor Attached on a Cantilever Beam Subjected to Impact Loading

• Published in: Sensors (Basel, Switzerland) Vol. 16; no. 5; p. 601
• Main Authors: Dung, Cao Vu, Sasaki, Eiichi
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 27-04-2016; MDPI
• Subjects: cantilever beam; Cantilever beams; Computer simulation; Impact loading; impact test; Impact tests; Investigations; Mathematical models; numerical simulation; Polyvinylidene fluorides; Position (location); PVDF sensor; Sensors; Signal to noise ratio; Simulation; PVDF sensor; cantilever beam; impact test; numerical simulation
• ISSN: 1424-8220; 1424-8220
• DOI: 10.3390/s16050601

Polyvinylidene Flouride (PVDF) is a film-type polymer that has been used as sensors and actuators in various applications due to its mechanical toughness, flexibility, and low density. A PVDF sensor typically covers an area of the host structure over which mechanical stress/strain is averaged and converted to electrical energy. This study investigates the fundamental "stress-averaging" mechanism for dynamic strain sensing in the in-plane mode. A numerical simulation was conducted to simulate the "stress-averaging" mechanism of a PVDF sensor attached on a cantilever beam subjected to an impact loading, taking into account the contribution of piezoelectricity, the cantilever beam's modal properties, and electronic signal conditioning. Impact tests and FEM analysis were also carried out to verify the numerical simulation results. The results of impact tests indicate the excellent capability of the attached PVDF sensor in capturing the fundamental natural frequencies of the cantilever beam. There is a good agreement between the PVDF sensor's output voltage predicted by the numerical simulation and that obtained in the impact tests. Parametric studies were conducted to investigate the effects of sensor size and sensor position and it is shown that a larger sensor tends to generate higher output voltage than a smaller one at the same location. However, the effect of sensor location seems to be more significant for larger sensors due to the cancelling problem. Overall, PVDF sensors exhibit excellent sensing capability for in-plane dynamic strain induced by impact loading.