In-situ monitoring and characterization of plug flow crystallizers
This work presents a study of a Roughton-type vortex mixer combined with a tubular reactor for the drowning out crystallization of benzoic acid from aqueous ethanol solutions using water as the anti-solvent. Mixing times in vortex mixers have been shown to be as low as 1ms and have also been found t...
Saved in:
Published in: | Chemical engineering science Vol. 77; pp. 105 - 111 |
---|---|
Main Authors: | , , , , |
Format: | Journal Article Conference Proceeding |
Language: | English |
Published: |
Kidlington
Elsevier Ltd
01-07-2012
Elsevier |
Subjects: | |
Online Access: | Get full text |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Summary: | This work presents a study of a Roughton-type vortex mixer combined with a tubular reactor for the drowning out crystallization of benzoic acid from aqueous ethanol solutions using water as the anti-solvent. Mixing times in vortex mixers have been shown to be as low as 1ms and have also been found to be largely independent of the relative flow rates of inlet streams. This enables operation with larger anti-solvent ratios, without sacrificing mixing efficiency. Permitting the generation of higher supersaturations, and smaller particles, while also increasing flexibility of the system by broadening the range of compounds that can be used.
Process analytical technologies (FBRM, PVM, ATR FT-IR) were applied in-situ in order to characterize crystallization via the use of a novel flow cell. A calibration-free method for concentration monitoring was successfully utilized to monitor the progress of the process. It was seen that the achievable particle size could be significantly reduced in size compared to batch operation, with a reduction in the square-weighted chord length from 152 to 52μm. For a given feed concentration, significant control over the product size within the plug flow crystallizer could be achieved, with an average square weighted chord length range of 52–87μm observed for the conditions investigated in this work.
► Use of plug flow crystallization system to anti-solvent crystallization of benzoic acid from aqueous ethanol solutions. ► Stable operation was observed with rapid attainment of steady state. ► A simple initial screening methodology for potential systems for use in plug flow crystallizers is outlined. ► PAT was successfully utilized to monitor and characterize plug flow crystallizations in situ. ► Final CSD at fixed feed concentration was significantly altered by manipulating anti-solvent and feed flow rates. |
---|---|
Bibliography: | http://dx.doi.org/10.1016/j.ces.2012.02.013 ObjectType-Article-1 SourceType-Scholarly Journals-1 ObjectType-Feature-2 content type line 23 |
ISSN: | 0009-2509 1873-4405 |
DOI: | 10.1016/j.ces.2012.02.013 |