Effects of {332}〈113〉 Deformation Twinning on Fatigue Behavior of Ti–Mn System Alloys

• Published in: MATERIALS TRANSACTIONS Vol. 60; no. 9; pp. 1850 - 1856
• Main Authors: Cho, Ken, Yuki, Kohei, Kobata, Hiroki, Niinomi, Mitsuo, Yasuda, Hiroyuki Y.
• Format: Journal Article
• Language: English
• Published: Sendai The Japan Institute of Metals and Materials 01-07-2019; Japan Science and Technology Agency
• Subjects: Accumulation; Alloy systems; Alloys; Crack initiation; Crack propagation; Crack tips; Deformation analysis; Deformation effects; Dislocations; Fatigue failure; fatigue properties; Fatigue strength; Fatigue tests; Fracture mechanics; Fracture surfaces; Metal fatigue; Plastic deformation; Propagation; Stress concentration; Stress propagation; Titanium base alloys; Twinning; {332}〈113〉 deformation twins; β-type Ti alloys
• ISSN: 1345-9678; 1347-5320
• DOI: 10.2320/matertrans.ME201919

The effects of {332}〈113〉 deformation twinning, one of the unique deformation modes for metastable β-type Ti alloys, on the fatigue behavior of Ti–Mn system alloys were investigated focusing on fatigue strength, fatigue crack initiation and propagation. Ti–7Mn and Ti–5Mn–3Mo (mass%) alloys which are primarily deformed by dislocation slips and {332}〈113〉 deformation twins, respectively, were subjected to fatigue tests conducted in tensile-tensile mode at room temperature, followed by fracture surface and deformation microstructure analyses. We found for the first time the Ti–5Mn–3Mo alloy has higher fatigue strength as compared to the Ti–7Mn alloy owing to the formation of the {332}〈113〉 deformation twins. The {332}〈113〉 deformation twins are to some extent responsible for the plastic strain accumulation in place of the dislocations during cyclic deformation. Thus, {332}〈113〉 deformation twinning prevents the accumulation of dislocations during cyclic deformation, thereby suppressing fatigue crack initiation. Moreover, formation of the {332}〈113〉 deformation twins around crack tip decreases stress concentration at the crack tip and changes the crack propagation direction, as a result, crack propagation speed is decreased. These results indicate that the {332}〈113〉 deformation twining is crucial for improving the fatigue properties of metastable β-type Ti alloys.