Simulated localized wear of resin luting cements for universal adhesive systems with different curing mode

• Published in: Journal of Oral Science Vol. 60; no. 1; pp. 29 - 36
• Main Authors: Tsujimoto, Akimasa, Barkmeier, Wayne W., Takamizawa, Toshiki, Watanabe, Hidehiko, Johnson, William W., Latta, Mark A., Miyazaki, Masashi
• Format: Journal Article
• Language: English
• Published: Japan Nihon University School of Dentistry 2018
• Subjects: curing mode; Dentistry; resin luting cement; simulated localized wear; simulated localized wear; curing mode; resin luting cement
• ISSN: 1343-4934; 1880-4926
• DOI: 10.2334/josnusd.16-0815

This study evaluated the simulated localized wear of resin luting cements for universal adhesive systems using different curing modes. Five resin luting cements for universal adhesive systems were evaluated and subsequently subjected to wear challenge in a Leinfelder-Suzuki wear simulation device. Overall, 20 specimens from each resin luting cement were photo-cured for 40 s (dual-cure group), and 20 specimens of each material were not photo-cured (chemical-cure group). Simulated localized wear was generated using a stainless steel ball-bearing antagonist in water slurry of polymethylmethacrylate beads. In addition, scanning electron microscopy (SEM) observations of resin luting cements and wear facets were conducted. Significant differences in simulated wear and SEM observations of wear facets were evident among the materials in the dual- and chemical-cure groups. The simulated wear and SEM observations of wear facets of G-CEM LinkForce and Panavia V5 were not influenced by the curing mode. SEM observations of resin luting cements were material dependent. In most cases, dual curing appears to ensure greater wear resistance of resin luting cements than chemical curing alone. The wear resistance of some resin luting cements appears to be material dependent and is not influenced by the curing mode.