Laser-based surface patterning of composite plates for improved secondary adhesive bonding

• Published in: Composites. Part A, Applied science and manufacturing Vol. 109; pp. 84 - 94
• Main Authors: Tao, Ran, Alfano, Marco, Lubineau, Gilles
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01-06-2018
• Subjects: Adhesive joints; CFRP; Fracture toughness; Patterned interface; Pulsed laser irradiation; 99-00; 00-01; Adhesive joints; CFRP; Pulsed laser irradiation; Fracture toughness; Patterned interface
• ISSN: 1359-835X; 1878-5840
• DOI: 10.1016/j.compositesa.2018.02.041

The effects of laser irradiation surface pretreatments on the mode I fracture toughness of adhesively bonded composite joints were evaluated. First, pulsed CO2 laser irradiation was uniformly deployed on carbon fiber reinforced polymer (CFRP) substrates. Next, double cantilever beam (DCB) tests were performed to assess the effects of surface pretreatments on the mode I fracture toughness of the adhesive joints. Then, a thoughtful combination of the proposed surface pretreatments was deployed to fabricate DCB specimens with patterned interfaces. A wide range of techniques, including X-ray photoelectron spectroscopy (XPS), contact profilometry, and optical and scanning electron microscopy (SEM) were used to ascertain the effects of all investigated surface pretreatments. It is shown that patterning promoted damage mechanisms that were not observed in the uniformly treated interfaces, resulting in an effective fracture toughness well above that predicted by a classical rule of mixture.