Experimental study on water-based mud: investigate rheological and filtration properties using cupressus cones powder

• Published in: Journal of petroleum exploration and production technology Vol. 12; no. 10; pp. 2699 - 2709
• Main Authors: Ali, Imtiaz, Ahmad, Maqsood, Ganat, Tarek Al-Arbi
• Format: Journal Article
• Language: English
• Published: Cham Springer International Publishing 01-10-2022; Springer Nature B.V
• Subjects: Additives; Agricultural wastes; Cleaning; Cones; Drilling fluids; Drilling muds; Earth and Environmental Science; Earth Sciences; Energy Systems; Filtrate; Filtration; Fluids; Gels; Geology; Industrial and Production Engineering; Industrial Chemistry/Chemical Engineering; Monitoring/Environmental Analysis; Mud; Offshore Engineering; Optimization; Original Paper-Exploration Engineering; Parameters; Properties; Rheological properties; Rheology; Viscosity; Waste materials; Water purification; Yield point; Filtration characteristics; Water-based mud; Agro-waste material; Rheological properties
• ISSN: 2190-0558; 2190-0566
• DOI: 10.1007/s13202-022-01471-8

Improper drilling fluid parameters may induce a variety of issues, including insufficient cuttings transport, limited solids suspension, poor hole cleaning, and excessive filtrate invasion to the formation. Controlled and optimized drilling fluids rheology is considered the key parameter to solve severe drilling problems encountered during drilling operations. Oil-based muds have numerous applications, but owing to some economic, environmental, and operational challenges, drilling companies are looking for new additives to enhance the characteristics of water-based muds for improved performance. However, the longer exposure of some WBM additives degrades them, which leads to insignificant mud characteristics. In this study, micro-sized naturally occurring agro-material namely cupressus cones powder (CCP) has been assessed as a potential additive in WBM for the first time to enhance the mud performance by improving its rheological and filtration properties. The objective of this study is to prepare a drilling fluid using abundantly available cupressus cones powder and investigate its effects on mud properties. The rheological and filtration characteristics of the drilling muds were determined based on API standards. A series of experiments have been performed to evaluate the impact of CCP loading on the rheology and fluid loss characteristics of drilling mud. The concentration of CCP was varied from 1 to 7 ppb. The findings of rheological characteristics demonstrated that altering the CCP loading enhanced the plastic viscosity, yield point, and gel strength of water-based drilling mud. The optimal concentration for PV was recorded in the range of 2–4 ppb, while the optimum value of YP was obtained at 6 ppb. Moreover, the temperature affected the viscosity and filtration of the mud, whereas the CCP containing muds were found salt resistant. The percent decrease in filtrate volume at 25, 121, and 150 °C was noted as 50, 59.6, and 62%, respectively. The effectiveness of the CCP was also observed from the SEM analysis. This study described the use of a locally available agro-waste material as a potential mud additive.