Evaluation of 3D-printed molds for fabrication of non-planar microchannels

• Published in: Biomicrofluidics Vol. 15; no. 2; p. 024111
• Main Authors: Parthiban, Pravien, Vijayan, Sindhu, Doyle, Patrick S., Hashimoto, Michinao
• Format: Journal Article
• Language: English
• Published: United States American Institute of Physics 01-03-2021; AIP Publishing LLC
• Subjects: 3-D printers; Fused deposition modeling; Glass substrates; Inkjet printing; Laser sintering; Lithography; Microchannels; Molds; Photolithography; Polydimethylsiloxane; Rapid prototyping; Regular; Surface roughness; Three dimensional flow; Three dimensional printing
• ISSN: 1932-1058; 1932-1058
• DOI: 10.1063/5.0047497

Replica obtained from micromolds patterned by simple photolithography has features with uniform heights, and attainable microchannels are thus quasi-two-dimensional. Recent progress in three-dimensional (3D) printing has enabled facile desktop fabrication of molds to replicate microchannels with varying heights. We investigated the replica obtained from four common techniques of 3D printing—fused deposition modeling, selective laser sintering, photo-polymer inkjet printing (PJ), and stereolithography (SL)—for the suitability to form microchannels in terms of the surface roughness inherent to the mechanism of 3D printing. There have been limited quantitative studies that focused on the surface roughness of a 3D-printed mold with different methods of 3D printing. We discussed that the surface roughness of the molds affected (1) transparency of the replica and (2) delamination pressure of poly(dimethylsiloxane) replica bonded to flat glass substrates. Thereafter, we quantified the accuracy of replication from 3D-printed molds by comparing the dimensions of the replicated parts to the designed dimensions and tested the ability to fabricate closely spaced microchannels. This study suggested that molds printed by PJ and SL printers were suitable for replica molding to fabricate microchannels with varying heights. The insight from this study shall be useful to fabricate 3D microchannels with controlled 3D patterns of flows guided by the geometry of the microchannels.