Physicochemical and Mechanical Performance of Freestanding Boron-Doped Diamond Nanosheets Coated with C:H:N:O Plasma Polymer

• Published in: Materials Vol. 13; no. 8; p. 1861
• Main Authors: Rycewicz, Michał, Macewicz, Łukasz, Kratochvil, Jiri, Stanisławska, Alicja, Ficek, Mateusz, Sawczak, Mirosław, Stranak, Vitezslav, Szkodo, Marek, Bogdanowicz, Robert
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 15-04-2020; MDPI
• Subjects: Adhesion; Boron; Chemical sensors; Chemical vapor deposition; diamond composite; Diamond films; Diamonds; Elastic deformation; Electromagnetism; Energy dissipation; Graphene; Low level; Magnetron sputtering; Mechanical properties; Microwave plasmas; Morphology; Nanoindentation; Nanomaterials; Nanosheets; Nitrogen; Nylon; Nylon 6; nylon 6.6; optical constants; Plasma enhanced chemical vapor deposition; Polymer films; Polymers; Spectrum analysis; Substrates; Surface energy; Thickness; Poland; United States > US; Japan; Germany; diamond composite; nylon 6.6; magnetron sputtering; optical constants; nanoindentation
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma13081861

The physicochemical and mechanical properties of thin and freestanding heavy boron-doped diamond (BDD) nanosheets coated with a thin C:H:N:O plasma polymer were studied. First, diamond nanosheets were grown and doped with boron on a Ta substrate using the microwave plasma-enhanced chemical vapor deposition technique (MPECVD). Next, the BDD/Ta samples were covered with nylon 6.6 to improve their stability in harsh environments and flexibility during elastic deformations. Plasma polymer films with a thickness of the 500-1000 nm were obtained by magnetron sputtering of a bulk target of nylon 6.6. Hydrophilic nitrogen-rich C:H:N:O was prepared by the sputtering of nylon 6.6. C:H:N:O as a film with high surface energy improves adhesion in ambient conditions. The nylon-diamond interface was perfectly formed, and hence, the adhesion behavior could be attributed to the dissipation of viscoelastic energy originating from irreversible energy loss in soft polymer structure. Diamond surface heterogeneities have been shown to pin the contact edge, indicating that the retraction process causes instantaneous fluctuations on the surface in specified microscale regions. The observed Raman bands at 390, 275, and 220 cm
were weak; therefore, the obtained films exhibited a low level of nylon 6 polymerization and short-distance arrangement, indicating crystal symmetry and interchain interactions. The mechanical properties of the nylon-on-diamond were determined by a nanoindentation test in multiload mode. Increasing the maximum load during the nanoindentation test resulted in a decreased hardness of the fabricated structure. The integration of freestanding diamond nanosheets will make it possible to design flexible chemical multielectrode sensors.