Hydrophobic Recovery of PDMS Surfaces in Contact with Hydrophilic Entities: Relevance to Biomedical Devices

• Published in: Materials Vol. 15; no. 6; p. 2313
• Main Authors: Tsuzuki, Tomoo, Baassiri, Karine, Mahmoudi, Zahra, Perumal, Ayyappasamy Sudalaiyadum, Rajendran, Kavya, Rubies, Gala Montiel, Nicolau, Dan V
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 21-03-2022; MDPI
• Subjects: Atomic Force Microscopy; Beads; Biocompatibility; Biodegradation; biomedical devices; Biomedical materials; Blood flow; catheters; Contact angle; Dentistry; dimethylpolysiloxane; Elastomers; Ethanol; Fourier transforms; gas embolism; Hydrophilicity; hydrophobic recovery; Hydrophobicity; Mechanical properties; Optical properties; Oxygen plasma; Polydimethylsiloxane; Polymers; Scanning electron microscopy; Silicon dioxide; Silicon nitride; Silicone resins; Topography; Ultraviolet radiation; Wetting; United States > US; Germany; biomedical devices; hydrophobic recovery; Atomic Force Microscopy; dimethylpolysiloxane; catheters; gas embolism
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma15062313

Polydimethylsiloxane (PDMS), a silicone elastomer, is increasingly being used in health and biomedical fields due to its excellent optical and mechanical properties. Its biocompatibility and resistance to biodegradation led to various applications (e.g., lung on a chip replicating blood flow, medical interventions, and diagnostics). The many advantages of PDMS are, however, partially offset by its inherent hydrophobicity, which makes it unsuitable for applications needing wetting, thus requiring the hydrophilization of its surface by exposure to UV or O
plasma. Yet, the elastomeric state of PDMS translates in a slow, hours to days, process of reducing its surface hydrophilicity-a process denominated as hydrophobic recovery. Using Fourier transform infrared spectroscopy (FTIR) and atomic force microscopy (AFM), the present study details the dynamics of hydrophobic recovery of PDMS, on flat bare surfaces and on surfaces embedded with hydrophilic beads. It was found that a thin, stiff, hydrophilic, silica film formed on top of the PDMS material, following its hydrophilization by UV radiation. The hydrophobic recovery of bare PDMS material is the result of an overlap of various nano-mechanical, and diffusional processes, each with its own dynamics rate, which were analyzed in parallel. The hydrophobic recovery presents a hysteresis, with surface hydrophobicity recovering only partially due to a thin, but resilient top silica layer. The monitoring of hydrophobic recovery of PDMS embedded with hydrophilic beads revealed that this is delayed, and then totally stalled in the few-micrometer vicinity of the embedded hydrophilic beads. This region where the hydrophobic recovery stalls can be used as a good approximation of the depth of the resilient, moderately hydrophilic top layer on the PDMS material. The complex processes of hydrophilization and subsequent hydrophobic recovery impact the design, fabrication, and operation of PDMS materials and devices used for diagnostics and medical procedures. Consequently, especially considering the emergence of new surgical procedures using elastomers, the impact of hydrophobic recovery on the surface of PDMS warrants more comprehensive studies.