Effect of Sterilization on the Properties of a Bioactive Hybrid Coating Containing Hydroxyapatite

• Published in: Advances in materials science and engineering Vol. 2019; no. 2019; pp. 1 - 13
• Main Authors: Brandalise, R. N., Rodói, V., Malfatti, C. F., Baldin, E. K. K.
• Format: Journal Article
• Language: English
• Published: Cairo, Egypt Hindawi Publishing Corporation 01-01-2019; Hindawi; Hindawi Limited
• Subjects: Abrasion resistant coatings; Abrasives; Acids; Alcohol; Alloys; Autoclaving; Biological activity; Biomedical materials; Calcium phosphates; Chemical industry; Coating effects; Corrosion resistance; Electrochemical analysis; Electrode polarization; Ethylene oxide; Fourier transforms; Hot pressing; Hydrogen peroxide; Hydroxyapatite; Immersion coating; Materials science; Mechanical properties; Open circuit voltage; Organic chemistry; Protective coatings; Researchers; Scanning electron microscopy; Stainless steel; Sterilization; Submerging; Tetraethyl orthosilicate; Titanium; Transplants & implants; Wear resistance; X-ray diffraction; Brazil
• ISSN: 1687-8434; 1687-8442
• DOI: 10.1155/2019/8593193

The objective of this study was to evaluate the influence of sterilization on a hybrid coating obtained from a sol composed of alkoxysilane tetraethoxysilane (TEOS) and organoalkoxysilane methyltriethoxysilane (MTES) containing 10% (mass) of hydroxyapatite particles. The coating was obtained by dip coating, by applying two layers (protective/bioactive), which were cured at different temperatures (450°C and 60°C). The effects of sterilization on the superficial, electrochemical, bioactive, and mechanical properties of the coating were evaluated by performing different sterilization processes, namely, steam autoclave, hydrogen peroxide plasma, and ethylene oxide. Subsequently, the coating was characterized by using scanning electron microscopy (SEM/FEG), and FTIR measurements were performed to characterize the chemical structure. The bioactivity and degradability of the coating were analyzed by mass variation after immersion in SBF and X-ray diffraction (XRD) analysis. The electrochemical behavior was assessed by open circuit potential (OCP) and potentiodynamic polarization curves and the mechanical behavior by wear resistance. Results showed that all sterilization processes caused significant morphological changes in the hybrid coating. The autoclaved sample presented the highest structural chemical changes, and, consequently, the highest degradability, even though it had a superior bioactive behavior in relation to the other samples. In addition, the sterilization processes influenced the electrochemical behavior of the hybrid coating and altered the mechanical resistance to abrasion, thus presenting lower wear performance in relation to the nonsterilized sample.