Nano-electromembrane extraction

• Published in: Analytica chimica acta Vol. 785; pp. 60 - 66
• Main Authors: Payán, María D. Ramos, Li, Bin, Petersen, Nickolaj Jacob, Jensen, Henrik, Hansen, Steen Honoré, Pedersen-Bjergaard, Stig
• Format: Journal Article
• Language: English
• Published: Netherlands Elsevier B.V 27-06-2013
• Subjects: Analytical chemistry; Capillarity; Electric potential; Electricity; Electrophoresis, Capillary; Enrichment; Ethers - chemistry; Extraction; Haloperidol - analysis; Haloperidol - isolation & purification; Loperamide - analysis; Loperamide - isolation & purification; Mathematical models; Membrane extraction; Membranes, Artificial; Meperidine - analysis; Meperidine - isolation & purification; Methadone - analysis; Methadone - isolation & purification; Nano-electromembrane extraction; Nano-extraction; Nanocomposites; Nanomaterials; Nanostructure; Nanotechnology; Nortriptyline - analysis; Nortriptyline - isolation & purification; Sample preparation; Separation; Sodium Chloride - chemistry; Solutions - chemistry; Sulfates - chemistry; Water - chemistry; Membrane extraction; Sample preparation; Nano-electromembrane extraction; Nano-extraction
• ISSN: 0003-2670; 1873-4324
• DOI: 10.1016/j.aca.2013.04.055

•EME (electromembrane extraction) was coupled directly with a CE separation capillary.•The acceptor volume was only in the order of 8nL.•High efficient CE separations could be obtained without the need of sample stacking.•The system presented high enrichment factors exceeding 500.•The supported liquid membrane (SLM) was stable for more than 200 extractions.
The present work has for the first time described nano-electromembrane extraction (nano-EME). In nano-EME, five basic drugs substances were extracted as model analytes from 200μL acidified sample solution, through a supported liquid membrane (SLM) of 2-nitrophenyl octyl ether (NPOE), and into approximately 8nL phosphate buffer (pH 2.7) as acceptor phase. The driving force for the extraction was an electrical potential sustained over the SLM. The acceptor phase was located inside a fused silica capillary, and this capillary was also used for the final analysis of the acceptor phase by capillary electrophoresis (CE). In that way the sample preparation performed by nano-EME was coupled directly with a CE separation. Separation performance of 42,000–193,000 theoretical plates could easily be obtained by this direct sample preparation and injection technique that both provided enrichment as well as extraction selectivity. Compared with conventional EME, the acceptor phase volume in nano-EME was down-scaled by a factor of more than 1000. This resulted in a very high enrichment capacity. With loperamide as an example, an enrichment factor exceeding 500 was obtained in only 5min of extraction. This corresponded to 100-times enrichment per minute of nano-EME. Nano-EME was found to be a very soft extraction technique, and about 99.2–99.9% of the analytes remained in the sample volume of 200μL. The SLM could be reused for more than 200 nano-EME extractions, and memory effects in the membrane were avoided by effective electro-assisted cleaning, where the electrical potential was actively used to clean the membrane.