Tribological characteristics and mechanism of nitrile butadiene rubber coated with typical liquid lubricants

• Published in: Polymer testing Vol. 115; p. 107724
• Main Authors: Liu, Yinsong, Shuai, Changgeng, Lu, Gang, Yang, Xue, Hu, Xiaoyang
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01-11-2022; Elsevier
• Subjects: Friction; Friction-induced vibration; Liquid lubricants; Nitrile butadiene rubber; Power spectral density; Wear; Liquid lubricants; Power spectral density; Friction; Wear; Friction-induced vibration; Nitrile butadiene rubber
• ISSN: 0142-9418; 1873-2348
• DOI: 10.1016/j.polymertesting.2022.107724

When marine stern shafts operate under low speed and heavy load conditions, the metal shaft and water-lubricated bearing will be in a state of boundary lubrication or even dry friction. Poor lubrication can cause severe wear and friction-induced vibration, endangering the stealth performance of underwater vehicles. In this study, several typical liquid lubricants, including liquid paraffin, tung oil (TO), dimethyl silicone oil (DSO), ionic liquid (IL), and hexamethylene diisocyanate (HDI) were selected as the surface coatings for nitrile butadiene rubber (NBR). Using a tribological test machine with a high-precision vibration acceleration sensor, as well as scanning electron microscopy (SEM) and other techniques, the tribological performance and mechanisms of the NBR samples coated with different lubricants were studied under various working conditions. The results showed that the liquid lubricant significantly reduced the coefficient of friction of the NBR at high rotational speeds by over 92.2%. The sample coated with HDI showed obvious tribochemical wear, and coating with the rest of the liquid lubricants decreased the specific wear rate of NBR. According to the friction-induced vibration signals, we found that an increase in loading aggravated friction-induced vibrations, and the vibrational energy was mainly concentrated in the low frequency range. The liquid paraffin and TO coatings barely changed the vibration characteristics of the NBR, while the other three lubricants produced more friction-induced self-oscillations. In conclusion, compared to the other liquid lubricants, TO exhibited the best tribological performance. The finding of this study further our understanding of the friction and vibration behaviours of polymer materials, providing a reliable basis for designing composite materials with good lubrication and vibration damping performance.
•A feasible method for friction-induced vibration testing and analyzing is provided.•The tribological behavior database of liquid lubricants is improved.•Tung oil shows excellent lubricating performance.•The lubrication state is revealed by friction, wear and vibration together.