Digital image correlation for microstructural analysis of deformation pattern in additively manufactured 316L thin walls

• Published in: Additive manufacturing Vol. 31; p. 100862
• Main Authors: Balit, Yanis, Charkaluk, Eric, Constantinescu, Andrei
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01-01-2020; Elsevier
• Subjects: Digital image correlation; Direct energy deposition; EBSD; Mechanics; Microstructure; Physics; Solid mechanics; Tensile test; Microstructure; Digital image correlation; Tensile test; EBSD; Direct energy deposition; Direct Energy Deposition; Digital Image Correlation; Tensile Test
• ISSN: 2214-8604; 2214-7810
• DOI: 10.1016/j.addma.2019.100862

[Display omitted]
•Characterization of the local deformation of the microstructure of 316L stainless steel single-track thickness walls.•EBSD and DIC analysis of material elements under in situ SEM tensile loading.•Crystallographic morphology and texture aligned with heat flow pattern induced by printing strategy.•Statistical analysis of morphology and strain patterns for small and large grains.•Relationship between grain's morphology, strain patterns and anisotropy of macroscopic behavior.
In additive manufacturing, the process parameters have a direct impact on the microstructure of the material and consequently on the mechanical properties of the manufactured parts. The purpose of this paper is to explore this relation by characterizing the local microstructural response via in situ tensile test under a scanning electron microscope (SEM) combined with high resolution digital image correlation (HR-DIC) and Electron Backscatter Diffraction (EBSD) maps. The specimens under scrutiny were extracted from bidirectionally-printed single-track thickness 316L stainless steel walls built by directed energy deposition. The morphologic and crystallographic textures of the grains were characterized by statistical analysis and associated with the particular heat flow pattern of the process. Grains were sorted according to their size into large columnar grains located within the printed layer and small equiaxed grains located at the interfaces between successive layers. In situ tensile experiments were performed with a loading direction either perpendicular or along the printing direction and exhibit different mechanisms of deformation. A statistical analysis of the average deformation per grain indicates that for a tensile loading along the building direction, small grains deform less than the large ones. In addition, HR-DIC combined with EBSD maps showed strain localization situated at the interface between layers in the absence of small grains either individual or in clusters. For tensile loads along the printing direction, the strain localization was present in several particular large grains. These observations permit to justify the differences in yield and ultimate strength noticed during macroscopic tensile tests for both configurations. Moreover, they indicate that an optimization of the process parameters could trigger the control of microstructure and consequently the macroscopic mechanical behavior.