Fractographic Features of the Fatigue Fracture of Nitinol Alloy

• Published in: Materials science (New York, N.Y.) Vol. 55; no. 5; pp. 774 - 779
• Main Authors: Iasnii, V. P., Nykyforchyn, H. M., Student, O. Z., Svirska, L. M.
• Format: Journal Article
• Language: English
• Published: New York Springer US 01-03-2020; Springer; Springer Nature B.V
• Subjects: Analysis; Characterization and Evaluation of Materials; Chemistry and Materials Science; Crack initiation; Crack propagation; Deformation mechanisms; Ductile fracture; Fatigue cracks; Fatigue failure; Fatigue tests; Fracture surfaces; Intermetallic compounds; Low cycle fatigue; Martensite; Materials Science; Metal fatigue; Nickel alloys; Nickel titanides; Nitinol alloys; Phase transitions; Shape memory alloys; Solid Mechanics; Specialty metals industry; Striations; Structural Materials; fractography; shape-memory alloy; martensitic transformation; hydrogen effect; plastic deformation
• ISSN: 1068-820X; 1573-885X
• DOI: 10.1007/s11003-020-00370-9

We study the macro- and microfractographic features of the mechanism of initiation and propagation of fatigue cracks in the nitinol alloy after its testing for low-cycle fatigue and analyze possible influence of the structural and phase transformations caused by the cyclic deformation of nitinol on the fractographic features of its fatigue fracture. Thus, almost parallel transcrystalline facets of brittle cleavage located in almost mutually perpendicular planes along the entire length of martensite crystals are observed within the boundaries of separate grains (first of all, in the early stages of fracture). The signs of shallow fatigue striations are detected (but rarely) in the zone of the stable growth of the fatigue crack. The spacing of these striations approximately corresponds to a crack-growth rate of 8 ∙ 10
7
m/cycle. It is suggested that the deformation transformation of austenite into martensite can also distort the classical deformation mechanism of formation of the fatigue striations. In the zones of fractures with uncontrolled crack growth, the elements of ductile pit topography are predominant, which is typical of the fracture surfaces of specimens destroyed under active loading.