Study of the effect of hydrothermal process conditions on pasta quality

• Published in: Journal of cereal science Vol. 41; no. 3; pp. 267 - 275
• Main Authors: Maache-Rezzoug, Z., Allaf, K.
• Format: Journal Article
• Language: English
• Published: Kidlington Elsevier Ltd 2005; Elsevier
• Subjects: Biological and medical sciences; Cereal and baking product industries; Chemical and Process Engineering; color; cooking quality; Engineering Sciences; Food industries; food processing quality; food quality; Fundamental and applied biological sciences. Psychology; hot water treatment; hydration; Hydration properties; Hydrothermal treatment; Pasta; pasting properties; pressure treatment; RVA; steam temperature; steaming; viscosity; water content; OCT; Hydration properties; Hydrothermal treatment; DSC; CPV; Pasta; RVA; HT; DIC; SB; Process conditions; Hydration; Quality
• ISSN: 0733-5210; 1095-9963
• DOI: 10.1016/j.jcs.2004.10.008

The effect of hydrothermal treatment on the pasting, hydration properties and colour quality of commercial fresh pasta were studied following an Instantaneous Controlled Pressure Drop treatment. This hydrothermal procedure involves a physical modification at high temperature (<144
°C) and restricted moisture content (<30%) during a very short time (15–40
s) followed by a rapid pressure drop to a vacuum (50
mbar). Two process variables (steam pressure level and processing time) were investigated using response surface methodology. Steam pressure level had the greatest effect on hydration and pasting parameters. Increased pressure resulted in elevation of mass ratio between cooked and uncooked pasta (
W
i
/
W
0)
100
°C and reduction of for all treated pasta. The optimum cooking time of untreated pasta was 7
min (
W/
W
0=2.4), whereas for the same ratio it was less than 1
min for pasta treated at pressures ranging between 2.5 and 3.5
bar. The viscosity at 10
min (
V
10) increased linearly when the pressure level increased.
V
10 was 146 cP for untreated pasta whereas it reached 2659 cP for pasta treated at 3.9
bar (144
°C) for 25
s. The cold paste viscosity and setback viscosity decreased when the pressure varied from 1 to 3.9
bar.