Evaluation of the Incorporation of Waste Generated from Titanium Dioxide Manufacturing in Red Ceramics

• Published in: Materials research (São Carlos, São Paulo, Brazil) Vol. 18; no. 1; pp. 98 - 105
• Main Authors: Ribeiro, Daniel Véras, Figueiredo, Sâmia Cordeiro, Machado, Alexandre Teixeira, Diaz, Francisco Rolando Valenzuela, Souza, Carlos Alberto Caldas
• Format: Journal Article
• Language: English
• Published: ABM, ABC, ABPol 01-02-2015; Associação Brasileira de Metalurgia e Materiais (ABM); Associação Brasileira de Cerâmica (ABC); Associação Brasileira de Polímeros (ABPol)
• Subjects: Bricks; Ceramics; ENGINEERING, CHEMICAL; Flexural strength; MATERIALS SCIENCE, MULTIDISCIPLINARY; METALLURGY & METALLURGICAL ENGINEERING; Modulus of rupture in bending; mud (RVFM); Porosity; red ceramic; Roofing; Titanium dioxide; waste recycling; Wastes; titanium dioxide; mud (RVFM); waste recycling; red ceramic
• ISSN: 1516-1439; 1980-5373; 1516-1439; 1980-5373
• DOI: 10.1590/1516-1439.274414

Rotary-vacuum-filter mud (RVFM) is waste generated during the manufacturing process of titanium dioxide. In this work, RVFM and ceramic bricks containing different ratios of this waste are investigated. The mud samples were characterized using thermal analysis (TG/DTG). The aim of the present work was to determine the effect of adding RVFM on the ceramic properties of clay, such as apparent porosity, water absorption, linear shrinkage and flexural strength, used to produce red ceramics (bricks and roofing tiles). Samples were dried out at 110[degrees]C and fired at 800[degrees]C, 950[degrees]C and 1100[degrees]C. The addition of RVFM tends to increase the apparent porosity and water absorption and to decrease the flexural strength of the ceramic specimens. Based on the results, ceramic specimens with 20% RVFM content that are burned at 800[degrees]C can not be used as bricks, and ceramic specimens with 20% RVFM content that are fired at 800[degrees]C and 950[degrees]C can not used as roofing tiles, according to Brazilian standards.