Fabrication of Stretchable Copper Coated Carbon Nanotube Conductor for Non-Enzymatic Glucose Detection Electrode with Low Detection Limit and Selectivity

• Published in: Polymers Vol. 10; no. 4; p. 375
• Main Authors: Jiang, Dawei, Liu, Zhongsheng, Wu, Kunkun, Mou, Linlin, Ovalle-Robles, Raquel, Inoue, Kanzan, Zhang, Yu, Yuan, Ningyi, Ding, Jianning, Qiu, Jianhua, Huang, Yi, Liu, Zunfeng
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 28-03-2018; MDPI
• Subjects: Acrylic acid; Carbon; Carbon nanotubes; Coated electrodes; Conductors; Copper; Electrode materials; Electrodes; Glucose; Lactic acid; Low resistance; Nanotubes; Rubber; Saline solutions; Selectivity; Stretchability; Sucrose; Uric acid; Wearable technology; buckle structure; carbon nanotube; elastic conductor; non-enzymatic glucose detection
• ISSN: 2073-4360; 2073-4360
• DOI: 10.3390/polym10040375

The increasing demand for wearable glucose sensing has stimulated growing interest in stretchable electrodes. The development of the electrode materials having large stretchability, low detection limit, and good selectivity is the key component for constructing high performance wearable glucose sensors. In this work, we presented fabrication of stretchable conductor based on the copper coated carbon nanotube sheath-core fiber, and its application as non-enzymatic electrode for glucose detection with high stretchability, low detection limit, and selectivity. The sheath-core fiber was fabricated by coating copper coated carbon nanotube on a pre-stretched rubber fiber core followed by release of pre-stretch, which had a hierarchically buckled structure. It showed a small resistance change as low as 27% as strain increasing from 0% to 500% strain, and a low resistance of 0.4 Ω·cm
at strain of 500%. This electrode showed linear glucose concentration detection in the range between 0.05 mM and 5 mM and good selectivity against sucrose, lactic acid, uric acid, acrylic acid in phosphate buffer saline solution, and showed stable signal in high salt concentration. The limit of detection (LOD) was 0.05 mM, for the range of 0.05⁻5 mM, the sensitivity is 46 mA·M
. This electrode can withstand large strain of up to 60% with negligible influence on its performance.