Magnetic Sensor Angle Adjustment to Improve Corrosion under Insulation Detection

• Published in: Sensors (Basel, Switzerland) Vol. 24; no. 3; p. 797
• Main Authors: Bailey, Joseph, Gouws, Gideon J, Long, Nicholas
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 25-01-2024
• Subjects: Corrosion; corrosion under insulation; eddy current testing; Insulation; Magnetic fields; magnetic sensors; Permeability; Sensors; Simulation; Steel; Steel pipes; eddy current testing; magnetic sensors; corrosion under insulation
• ISSN: 1424-8220; 1424-8220
• DOI: 10.3390/s24030797

A large portion of the pipe infrastructure used in the chemical processing industry is susceptible to corrosion under insulation (CUI). Eddy current-based magnetic sensing is one of the methods that can be used as an early detector of this corrosion. However, the large sensor-to-pipe distances used in this method, due to the presence of insulation, limits the sensitivity to corrosion. This paper will describe the development of instrumentation and methods based on eddy current sensing with thin-film magnetic sensors. In particular, it focuses on the influence of the sensor angle relative to the radial magnetic field. The influence of this parameter on the amplitude of the measured signal was investigated by both finite element simulations and experimental observations. The measured magnetic field was found to be highly sensitive to small changes in sensor angle, with the estimated depth of a defect changing at a rate of 11.2 mm/degree of sensor rotation for small angles. It is also shown that a sensor aligned with the radial direction should be avoided, with an optimal sensor angle between 0.5 and 4 degrees. With the sensor in this angle range, the simulations have shown it should be possible to resolve the depth of corrosion to a resolution of 0.1 mm.