Evaluation of linear polymerization shrinkage, flexural strength and modulus of elasticity of dental composites
Linear polymerization shrinkage (LPS), flexural strength (FS) and modulus of elasticity (ME) of 7 dental composites (Filtek Z350™, Filtek Z250™/3M ESPE; Grandio™, Polofil Supra™/VOCO; TPH Spectrum™, TPH3™, Esthet-X™/Denstply) were measured. For the measurement of LPS, composites were applied to a cy...
Saved in:
| Published in: | Materials research (São Carlos, São Paulo, Brazil) Vol. 13; no. 1; pp. 51 - 55 |
|---|---|
| Main Authors: | , |
| Format: | Journal Article |
| Language: | English |
| Published: |
ABM, ABC, ABPol
01-03-2010
Associação Brasileira de Metalurgia e Materiais (ABM); Associação Brasileira de Cerâmica (ABC); Associação Brasileira de Polímeros (ABPol) |
| Subjects: | |
| Online Access: | Get full text |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Abstract | Linear polymerization shrinkage (LPS), flexural strength (FS) and modulus of elasticity (ME) of 7 dental composites (Filtek Z350™, Filtek Z250™/3M ESPE; Grandio™, Polofil Supra™/VOCO; TPH Spectrum™, TPH3™, Esthet-X™/Denstply) were measured. For the measurement of LPS, composites were applied to a cylindrical metallic mold and polymerized (n = 8). The gap formed at the resin/mold interface was observed using scanning electron microscopy (1500×). For FS and ME, specimens were prepared according to the ISO 4049 specifications (n = 10). Statistical analysis of the data was performed with one-way ANOVA and the Tukey test. TPH Spectrum presented significantly higher LPS values (29.45 µm). Grandio had significantly higher mean values for FS (141.07 MPa) and ME (13.91 GPa). The relationship between modulus of elasticity and polymerization shrinkage is the main challenge for maintenance of the adhesive interface, thus composites presenting high shrinkage values, associated with a high modulus of elasticity tend to disrupt the adhesive interface under polymerization. |
|---|---|
| AbstractList | Linear polymerization shrinkage (LPS), flexural strength (FS) and modulus of elasticity (ME) of 7 dental composites (Filtek Z350™, Filtek Z250™/3M ESPE; Grandio™, Polofil Supra™/VOCO; TPH Spectrum™, TPH3™, Esthet-X™/Denstply) were measured. For the measurement of LPS, composites were applied to a cylindrical metallic mold and polymerized (n = 8). The gap formed at the resin/mold interface was observed using scanning electron microscopy (1500×). For FS and ME, specimens were prepared according to the ISO 4049 specifications (n = 10). Statistical analysis of the data was performed with one-way ANOVA and the Tukey test. TPH Spectrum presented significantly higher LPS values (29.45 µm). Grandio had significantly higher mean values for FS (141.07 MPa) and ME (13.91 GPa). The relationship between modulus of elasticity and polymerization shrinkage is the main challenge for maintenance of the adhesive interface, thus composites presenting high shrinkage values, associated with a high modulus of elasticity tend to disrupt the adhesive interface under polymerization. |
| Author | Monteiro, Gabriela Queiroz de Melo Montes, Marcos Antonio Japiassú Resende |
| AuthorAffiliation | Universidade de Pernambuco Centro Universitário de João Pessoa |
| AuthorAffiliation_xml | – name: Centro Universitário de João Pessoa – name: Universidade de Pernambuco |
| Author_xml | – sequence: 1 givenname: Gabriela Queiroz de Melo surname: Monteiro fullname: Monteiro, Gabriela Queiroz de Melo organization: UNIPÊ, Brazil – sequence: 2 givenname: Marcos Antonio Japiassú Resende surname: Montes fullname: Montes, Marcos Antonio Japiassú Resende organization: Universidade de Pernambuco, Brazil |
| BookMark | eNp1UV1rGzEQFMWBxkl_Q-8H1K4-fCffYwhuEwj0IcmzWK9WjhxZMtJdqfvrI8fFFEr1sNrV7AzDaMomMUVi7LPgc9H2_OujaEU3EwvVSy54Pcci5Ad2eQYmf_Uf2bSULedSq05dsrT6CWGEwafYJNcEHwlys0_hsKPsf5-A8pJ9fIUNfWlcoF9jhtCUIVPcDC8NRNvskh3DWI4KFKAMHv1wOE6W4lCXMe32qfiByjW7cBAKffpzX7Hnb6un27vZw4_v97c3DzNcCDHMeqdQcSu14Eq1vSYugLsFcrV2nRV6YZGDstYuUWupEMkhStlSxdvaqSt2f9K1CbZmn_0O8sEk8Ob9IeWNgVx9BjIoO7ACQej1sgYEvWxdh7S2qDotrata85NWQU8hmW0ac6zmzXv05p_oK0GfCJhTKZnc2YDg5vhp_2W-AX-5jI4 |
| CitedBy_id | crossref_primary_10_5005_jp_journals_10024_2846 crossref_primary_10_2341_20_244_L crossref_primary_10_1002_jemt_23041 crossref_primary_10_1155_2022_1743019 crossref_primary_10_1016_j_jmbbm_2015_09_033 crossref_primary_10_1590_0103_6440201802525 crossref_primary_10_1002_admi_201800511 crossref_primary_10_1016_j_jmbbm_2024_106450 crossref_primary_10_14368_jdras_2018_34_2_72 crossref_primary_10_1177_23202068231199543 crossref_primary_10_14368_jdras_2016_32_3_169 crossref_primary_10_3390_oral1020008 crossref_primary_10_3390_polym13132054 crossref_primary_10_1007_s10965_019_1975_2 crossref_primary_10_5005_jp_journals_10005_2363 crossref_primary_10_1155_2024_6817593 crossref_primary_10_4103_ijdr_IJDR_113_15 crossref_primary_10_1002_pc_24131 crossref_primary_10_1007_s13191_012_0236_4 crossref_primary_10_1177_1528083718811086 crossref_primary_10_1177_0954411921990138 |
| Cites_doi | 10.1016/j.dental.2008.11.010 10.1016/j.dental.2005.04.019 10.1016/j.dental.2004.10.004 10.1016/j.dental.2009.02.005 10.1016/j.dental.2005.04.038 10.1016/j.dental.2005.04.018 10.1016/j.dental.2005.11.023 10.1016/j.dental.2005.03.006 10.1016/S0109-5641(03)00097-6 10.14219/jada.archive.2003.0054 10.1016/j.dental.2005.10.009 10.1016/S0109-5641(98)00009-8 10.1111/j.1365-2842.2004.01352.x 10.1016/j.jdent.2003.08.008 10.1016/j.dental.2007.08.007 10.1016/S0300-5712(03)00049-6 10.1016/j.dental.2003.11.002 10.1016/j.dental.2005.02.004 10.1016/j.dental.2007.06.031 10.1016/j.dental.2004.10.007 10.1016/j.dental.2005.12.003 10.1590/S1678-77572008000100007 |
| ContentType | Journal Article |
| Copyright | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
| Copyright_xml | – notice: This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
| DBID | AAYXX CITATION GPN DOA |
| DOI | 10.1590/S1516-14392010000100012 |
| DatabaseName | CrossRef SciELO Directory of Open Access Journals |
| DatabaseTitle | CrossRef |
| DatabaseTitleList | |
| Database_xml | – sequence: 1 dbid: DOA name: Directory of Open Access Journals url: http://www.doaj.org/ sourceTypes: Open Website |
| DeliveryMethod | fulltext_linktorsrc |
| Discipline | Engineering |
| EISSN | 1516-1439 |
| EndPage | 55 |
| ExternalDocumentID | oai_doaj_org_article_c26ad1ca17b8439a925f6cebdc3672df S1516_14392010000100012 10_1590_S1516_14392010000100012 |
| GroupedDBID | 2WC 5GY 5VS AAYXX ABXHO ACIWK ADBBV ALMA_UNASSIGNED_HOLDINGS APOWU AZFZN BCNDV C1A CITATION CS3 E3Z EBS EJD GROUPED_DOAJ GX1 HH5 IPNFZ KQ8 OK1 P2P RIG RNS RSC SCD TR2 XSB GPN |
| ID | FETCH-LOGICAL-c411t-9f3c30d271033597e01a0f4c03bf6d174dc0a3ddd8c7723ccefcc225e3bf5cc23 |
| IEDL.DBID | DOA |
| ISSN | 1516-1439 1980-5373 |
| IngestDate | Tue Oct 22 15:13:57 EDT 2024 Tue Nov 19 21:47:46 EST 2024 Fri Aug 23 03:25:22 EDT 2024 |
| IsDoiOpenAccess | true |
| IsOpenAccess | true |
| IsPeerReviewed | true |
| IsScholarly | true |
| Issue | 1 |
| Keywords | composite resin flexural strength modulus of elasticity polymerization shrinkage |
| Language | English |
| License | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. http://creativecommons.org/licenses/by-nc/4.0 |
| LinkModel | DirectLink |
| MergedId | FETCHMERGED-LOGICAL-c411t-9f3c30d271033597e01a0f4c03bf6d174dc0a3ddd8c7723ccefcc225e3bf5cc23 |
| OpenAccessLink | https://doaj.org/article/c26ad1ca17b8439a925f6cebdc3672df |
| PageCount | 5 |
| ParticipantIDs | doaj_primary_oai_doaj_org_article_c26ad1ca17b8439a925f6cebdc3672df scielo_journals_S1516_14392010000100012 crossref_primary_10_1590_S1516_14392010000100012 |
| PublicationCentury | 2000 |
| PublicationDate | 20100301 |
| PublicationDateYYYYMMDD | 2010-03-01 |
| PublicationDate_xml | – month: 03 year: 2010 text: 20100301 day: 01 |
| PublicationDecade | 2010 |
| PublicationTitle | Materials research (São Carlos, São Paulo, Brazil) |
| PublicationTitleAlternate | Mat. Res |
| PublicationYear | 2010 |
| Publisher | ABM, ABC, ABPol Associação Brasileira de Metalurgia e Materiais (ABM); Associação Brasileira de Cerâmica (ABC); Associação Brasileira de Polímeros (ABPol) |
| Publisher_xml | – name: ABM, ABC, ABPol – name: Associação Brasileira de Metalurgia e Materiais (ABM); Associação Brasileira de Cerâmica (ABC); Associação Brasileira de Polímeros (ABPol) |
| References | Walker MP (ref17) 2006; 22 Mesquita RV (ref23) 2006; 22 Adabo GL (ref18) 2000; 31 Ilie N (ref27) 2009; 25 Cadenaro M (ref16) 2008; 24 Floyd CJE (ref24) 2006; 22 Pereira RA (ref1) 2008; 16 Sabbagh J (ref19) 2004; 31 Weinmann W (ref25) 2004; 21 Cadenaro M (ref21) 2009; 25 Watts DC (ref15) 2008; 24 Ferracane JL (ref7) 2005; 21 Beun S (ref10) 2007; 23 Rasband WS (ref12) Asmussen E (ref22) 1998; 14 ref26 Gayosso CA (ref2) 2004; 20 Kleverlaan CJ (ref5) 2005; 21 Helvatjoglu-Antoniades M (ref6) 2006; 22 Braga RR (ref9) 2005; 21 Mitra SB (ref8) 2003; 134 Obici AC (ref11) 2002; 27 Park JW (ref4) 2005; 21 Sakaguchi RL (ref14) 2004; 20 Kaufman G (ref20) 1994; 5 Peutzfeldt A (ref3) 2004; 32 (ref13) 2000 Rasband, WS Kaufman, G 1994; 5 Walker, MP; Haj-Ali, R; Wang, Y; Hunziker, D; Williams, KB 2006; 22 Cadenaro, M; Marchesi, G; Scuor, N; Breschi, L; Davidson, CL; Di Lenarda, R 2008; 24 Mesquita, RV; Axmann, D; Geis-Gerstorfer, J 2006; 22 Asmussen, E; Peutzfeldt, A 1998; 14 Adabo, GL; Cruz, CAS; Fonseca, RG; Vaz, LG 2000; 31 Kleverlaan, CJ; Feilzer, AJ 2005; 21 Watts, DC; Satterthwaite, JD 2008; 24 Sakaguchi, RL; Wiltbank, BD; Shah, NC 2004; 20 Helvatjoglu-Antoniades, M; Papadogiannis, Y; Lakes, RS; Dionysopoulos, P; Papadogiannis, D 2006; 22 Pereira, RA; Araújo, PA; Casteñeda-Espinosa, JC; Mondelli, RFL 2008; 16 Ilie, N; Hickel, R 2009; 25 Gayosso, CA; Santana, FB; Ibarra, JG; Espínola, GS; Martinez, MAC 2004; 20 Peutzfeldt, A; Asmussen, E 2004; 32 Mitra, SB; Wu, D; Holmes, BN 2003; 134 2000 Cadenaro, M; Marchesi, G; Antoniolli, F; Davidson, C; Dorigo, EDS; Breschi, L 2009; 25 Weinmann, W; Thalacker, C; Guggenberger, R 2004; 21 Braga, RR; Ballester, RY; Ferracane, JL 2005; 21 Sabbagh, J; Ryelandt, L; Bacherius, L; Biebuyck, JJ; Vreven, J; Lambrechts, P; Leloup, G 2004; 31 Park, JW; Ferracane, JL 2005; 21 Beun, S; Gloriex, T; Devaux, J; Vreven, J; Leloup, G 2007; 23 Floyd, CJE; Dickens, SH 2006; 22 Obici, AC; Sinhoreti, MAC; Goes, MF; Consani, S; Sobrinho, LC 2002; 27 Ferracane, JL 2005; 21 |
| References_xml | – volume: 25 start-page: 649 issn: 0109-5641 issue: 5 year: 2009 ident: ref21 article-title: Flowability of composites is no guarantee for contraction stress reduction publication-title: Dental Materials doi: 10.1016/j.dental.2008.11.010 contributor: fullname: Cadenaro M – start-page: 1 year: 2000 ident: ref13 – volume: 22 start-page: 258 issn: 0109-5641 issue: 3 year: 2006 ident: ref23 article-title: Dynamic visco-elastic properties of dental composite resins publication-title: Dental Materials doi: 10.1016/j.dental.2005.04.019 contributor: fullname: Mesquita RV – volume: 21 start-page: 36 issn: 0109-5641 issue: 1 year: 2005 ident: ref7 article-title: Developing a more complete understanding of stresses produced in dental composites during polymerization publication-title: Dental Materials doi: 10.1016/j.dental.2004.10.004 contributor: fullname: Ferracane JL – volume: 25 start-page: 810 issn: 0109-5641 issue: 6 year: 2009 ident: ref27 article-title: Macro-, micro- and nano-mechanical investigations on silorane and methacrylate-based composites publication-title: Dental Materials doi: 10.1016/j.dental.2009.02.005 contributor: fullname: Ilie N – volume: 22 start-page: 450 issn: 0109-5641 issue: 5 year: 2006 ident: ref6 article-title: Dynamic and static elastic moduli of packable and flowable composite resins and their development after initial photo curing publication-title: Dental Materials doi: 10.1016/j.dental.2005.04.038 contributor: fullname: Helvatjoglu-Antoniades M – volume: 21 start-page: 962 issn: 0109-5641 issue: 10 year: 2005 ident: ref9 article-title: Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review publication-title: Dental Materials doi: 10.1016/j.dental.2005.04.018 contributor: fullname: Braga RR – volume: 22 start-page: 1002 issn: 0109-5641 issue: 11 year: 2006 ident: ref17 article-title: Influence of environmental conditions on dental composite flexural properties publication-title: Dental Materials doi: 10.1016/j.dental.2005.11.023 contributor: fullname: Walker MP – volume: 21 start-page: 882 issn: 0109-5641 issue: 9 year: 2005 ident: ref4 article-title: Measuring residual stress in dental composites using a ring slitting method publication-title: Dental Materials doi: 10.1016/j.dental.2005.03.006 contributor: fullname: Park JW – volume: 20 start-page: 228 issn: 0109-5641 issue: 3 year: 2004 ident: ref2 article-title: Calculation of contraction rates due to shrinkage in light-cured composites publication-title: Dental Materials doi: 10.1016/S0109-5641(03)00097-6 contributor: fullname: Gayosso CA – ident: ref12 contributor: fullname: Rasband WS – volume: 134 start-page: 1382 issn: 0002-8177 issue: 10 year: 2003 ident: ref8 article-title: An application of nanotechnology in advanced dental materials publication-title: Journal of the American Dental Association doi: 10.14219/jada.archive.2003.0054 contributor: fullname: Mitra SB – volume: 22 start-page: 1143 issn: 0109-5641 issue: 12 year: 2006 ident: ref24 article-title: Network structure of Bis-GMA- and UDMA-based resin systems publication-title: Dental Materials doi: 10.1016/j.dental.2005.10.009 contributor: fullname: Floyd CJE – volume: 27 start-page: 192 issn: 0361-7734 issue: 1 year: 2002 ident: ref11 article-title: Effect of photo-activation method upon polymerization shrinkage of restorative composites publication-title: Operative Dentistry contributor: fullname: Obici AC – volume: 14 start-page: 51 issn: 0109-5641 issue: 1 year: 1998 ident: ref22 article-title: Influence of UEDMA, BisGMA and TEGDMA on selected mechanical properties of experimental resin composites publication-title: Dental Materials doi: 10.1016/S0109-5641(98)00009-8 contributor: fullname: Asmussen E – volume: 31 start-page: 1090 issn: 0305-182X issue: 11 year: 2004 ident: ref19 article-title: Characterization of the inorganic fraction of resin composites publication-title: Journal of Oral Rehabilitation doi: 10.1111/j.1365-2842.2004.01352.x contributor: fullname: Sabbagh J – volume: 32 start-page: 109 issn: 0300-5712 issue: 2 year: 2004 ident: ref3 article-title: Determinants of in vitro gap formation of resin composites publication-title: Journal of Dentistry doi: 10.1016/j.jdent.2003.08.008 contributor: fullname: Peutzfeldt A – volume: 5 start-page: 10 issn: 1045-9812 year: 1994 ident: ref20 article-title: A new resin composite restorative incorporating synthetic filler technology and optimized particle size distribution publication-title: Esthetic Dentistry Update contributor: fullname: Kaufman G – volume: 24 start-page: 1 issn: 0109-5641 issue: 1 year: 2008 ident: ref15 article-title: Axial shrinkage-stress depends upon both C-factor and composite mass publication-title: Dental Materials doi: 10.1016/j.dental.2007.08.007 contributor: fullname: Watts DC – volume: 31 start-page: 353 issn: 0300-5712 issue: 5 year: 2000 ident: ref18 article-title: The volumetric fraction of inorganic particles and the flexural strength of composites for posterior teeth publication-title: Journal of Dentistry doi: 10.1016/S0300-5712(03)00049-6 contributor: fullname: Adabo GL – ident: ref26 – volume: 20 start-page: 388 issn: 0109-5641 issue: 4 year: 2004 ident: ref14 article-title: Critical configuration analysis of four methods for measuring polymerization shrinkage strain of composites publication-title: Dental Materials doi: 10.1016/j.dental.2003.11.002 contributor: fullname: Sakaguchi RL – volume: 21 start-page: 1150 issn: 0109-5641 issue: 12 year: 2005 ident: ref5 article-title: Polymerization shrinkage and contraction stress of dental resin composites publication-title: Dental Materials doi: 10.1016/j.dental.2005.02.004 contributor: fullname: Kleverlaan CJ – volume: 24 start-page: 649 issn: 0109-5641 issue: 5 year: 2008 ident: ref16 article-title: Assessment of polymerization contraction stress of three composite resins publication-title: Dental Materials doi: 10.1016/j.dental.2007.06.031 contributor: fullname: Cadenaro M – volume: 21 start-page: 68 issn: 0109-5641 issue: 1 year: 2004 ident: ref25 article-title: Siloranes in dental composites publication-title: Dental Materials doi: 10.1016/j.dental.2004.10.007 contributor: fullname: Weinmann W – volume: 23 start-page: 51 issn: 0109-5641 issue: 1 year: 2007 ident: ref10 article-title: Characterization of nanofilled compared to universal and microfilled composites publication-title: Dental Materials doi: 10.1016/j.dental.2005.12.003 contributor: fullname: Beun S – volume: 16 start-page: 30 issn: 1678-7757 issue: 1 year: 2008 ident: ref1 article-title: Comparative analysis of the shrinkage stress of composite resins publication-title: Journal of Applied Oral Science doi: 10.1590/S1678-77572008000100007 contributor: fullname: Pereira RA – volume: 21 start-page: 962 issue: 10 year: 2005 end-page: 970 article-title: Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review publication-title: Dental Materials contributor: fullname: Braga, RR; Ballester, RY; Ferracane, JL – publication-title: ImageJ contributor: fullname: Rasband, WS – volume: 31 start-page: 1090 issue: 11 year: 2004 end-page: 1101 article-title: Characterization of the inorganic fraction of resin composites publication-title: Journal of Oral Rehabilitation contributor: fullname: Sabbagh, J; Ryelandt, L; Bacherius, L; Biebuyck, JJ; Vreven, J; Lambrechts, P; Leloup, G – volume: 20 start-page: 228 issue: 3 year: 2004 end-page: 235 article-title: Calculation of contraction rates due to shrinkage in light-cured composites publication-title: Dental Materials contributor: fullname: Gayosso, CA; Santana, FB; Ibarra, JG; Espínola, GS; Martinez, MAC – volume: 134 start-page: 1382 issue: 10 year: 2003 end-page: 1390 article-title: An application of nanotechnology in advanced dental materials publication-title: Journal of the American Dental Association contributor: fullname: Mitra, SB; Wu, D; Holmes, BN – volume: 16 start-page: 30 issue: 1 year: 2008 end-page: 34 article-title: Comparative analysis of the shrinkage stress of composite resins publication-title: Journal of Applied Oral Science contributor: fullname: Pereira, RA; Araújo, PA; Casteñeda-Espinosa, JC; Mondelli, RFL – volume: 24 start-page: 1 issue: 1 year: 2008 end-page: 8 article-title: Axial shrinkage-stress depends upon both C-factor and composite mass publication-title: Dental Materials contributor: fullname: Watts, DC; Satterthwaite, JD – volume: 27 start-page: 192 issue: 1 year: 2002 end-page: 198 article-title: Effect of photo-activation method upon polymerization shrinkage of restorative composites publication-title: Operative Dentistry contributor: fullname: Obici, AC; Sinhoreti, MAC; Goes, MF; Consani, S; Sobrinho, LC – volume: 20 start-page: 388 issue: 4 year: 2004 end-page: 396 article-title: Critical configuration analysis of four methods for measuring polymerization shrinkage strain of composites publication-title: Dental Materials contributor: fullname: Sakaguchi, RL; Wiltbank, BD; Shah, NC – publication-title: Filtek LS: Technical Profile – volume: 23 start-page: 51 issue: 1 year: 2007 end-page: 59 article-title: Characterization of nanofilled compared to universal and microfilled composites publication-title: Dental Materials contributor: fullname: Beun, S; Gloriex, T; Devaux, J; Vreven, J; Leloup, G – volume: 5 start-page: 10 year: 1994 end-page: 12 article-title: A new resin composite restorative incorporating synthetic filler technology and optimized particle size distribution publication-title: Esthetic Dentistry Update contributor: fullname: Kaufman, G – volume: 21 start-page: 36 issue: 1 year: 2005 end-page: 42 article-title: Developing a more complete understanding of stresses produced in dental composites during polymerization publication-title: Dental Materials contributor: fullname: Ferracane, JL – start-page: 1 year: 2000 end-page: 22 publication-title: ISO 4049 Dentistry - polymer-based filling, restorative and luting materials – volume: 31 start-page: 353 issue: 5 year: 2000 end-page: 359 article-title: The volumetric fraction of inorganic particles and the flexural strength of composites for posterior teeth publication-title: Journal of Dentistry contributor: fullname: Adabo, GL; Cruz, CAS; Fonseca, RG; Vaz, LG – volume: 21 start-page: 882 issue: 9 year: 2005 end-page: 889 article-title: Measuring residual stress in dental composites using a ring slitting method publication-title: Dental Materials contributor: fullname: Park, JW; Ferracane, JL – volume: 24 start-page: 649 issue: 5 year: 2008 end-page: 654 article-title: Assessment of polymerization contraction stress of three composite resins publication-title: Dental Materials contributor: fullname: Cadenaro, M; Marchesi, G; Scuor, N; Breschi, L; Davidson, CL; Di Lenarda, R – volume: 25 start-page: 810 issue: 6 year: 2009 end-page: 819 article-title: Macro-, micro- and nano-mechanical investigations on silorane and methacrylate-based composites publication-title: Dental Materials contributor: fullname: Ilie, N; Hickel, R – volume: 22 start-page: 1002 issue: 11 year: 2006 end-page: 1007 article-title: Influence of environmental conditions on dental composite flexural properties publication-title: Dental Materials contributor: fullname: Walker, MP; Haj-Ali, R; Wang, Y; Hunziker, D; Williams, KB – volume: 32 start-page: 109 issue: 2 year: 2004 end-page: 115 article-title: Determinants of in vitro gap formation of resin composites publication-title: Journal of Dentistry contributor: fullname: Peutzfeldt, A; Asmussen, E – volume: 22 start-page: 450 issue: 5 year: 2006 end-page: 459 article-title: Dynamic and static elastic moduli of packable and flowable composite resins and their development after initial photo curing publication-title: Dental Materials contributor: fullname: Helvatjoglu-Antoniades, M; Papadogiannis, Y; Lakes, RS; Dionysopoulos, P; Papadogiannis, D – volume: 14 start-page: 51 issue: 1 year: 1998 end-page: 6 article-title: Influence of UEDMA, BisGMA and TEGDMA on selected mechanical properties of experimental resin composites publication-title: Dental Materials contributor: fullname: Asmussen, E; Peutzfeldt, A – volume: 21 start-page: 1150 issue: 12 year: 2005 end-page: 1157 article-title: Polymerization shrinkage and contraction stress of dental resin composites publication-title: Dental Materials contributor: fullname: Kleverlaan, CJ; Feilzer, AJ – volume: 22 start-page: 1143 issue: 12 year: 2006 end-page: 1149 article-title: Network structure of Bis-GMA- and UDMA-based resin systems publication-title: Dental Materials contributor: fullname: Floyd, CJE; Dickens, SH – volume: 21 start-page: 68 issue: 1 year: 2004 end-page: 74 article-title: Siloranes in dental composites publication-title: Dental Materials contributor: fullname: Weinmann, W; Thalacker, C; Guggenberger, R – volume: 25 start-page: 649 issue: 5 year: 2009 end-page: 654 article-title: Flowability of composites is no guarantee for contraction stress reduction publication-title: Dental Materials contributor: fullname: Cadenaro, M; Marchesi, G; Antoniolli, F; Davidson, C; Dorigo, EDS; Breschi, L – volume: 22 start-page: 258 issue: 3 year: 2006 end-page: 267 article-title: Dynamic visco-elastic properties of dental composite resins publication-title: Dental Materials contributor: fullname: Mesquita, RV; Axmann, D; Geis-Gerstorfer, J |
| SSID | ssj0027363 |
| Score | 1.9699843 |
| Snippet | Linear polymerization shrinkage (LPS), flexural strength (FS) and modulus of elasticity (ME) of 7 dental composites (Filtek Z350™, Filtek Z250™/3M ESPE;... |
| SourceID | doaj scielo crossref |
| SourceType | Open Website Open Access Repository Aggregation Database |
| StartPage | 51 |
| SubjectTerms | composite resin ENGINEERING, CHEMICAL flexural strength MATERIALS SCIENCE, MULTIDISCIPLINARY METALLURGY & METALLURGICAL ENGINEERING modulus of elasticity polymerization shrinkage |
| Title | Evaluation of linear polymerization shrinkage, flexural strength and modulus of elasticity of dental composites |
| URI | http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392010000100012&lng=en&tlng=en https://doaj.org/article/c26ad1ca17b8439a925f6cebdc3672df |
| Volume | 13 |
| hasFullText | 1 |
| inHoldings | 1 |
| isFullTextHit | |
| isPrint | |
| link | http://sdu.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwrV1LT4QwEG50T3owPuP6Sg8mXiSWFrpw9LGbPXlZTbyRMm01EcHIbqL_3hlgicYYL96gFEpmaOcbOvMNY6cgfA5oyII4jX0QoUUJTD4yAYQOpE5j4yXlDk9no9uH5GZMNDl9qS-KCWvpgVvBXeAdxoZgwlGeoPE0qYy9BpdbUHokrW9WX6GXztTS1VJNDTU0ZzpARJB2kV1xKi5mfSNtBBPGaf7GfLNLDX0_kYfi_Cq-GpzJJtvokCK_bN9wi624cputf-EP3GHVuOfq5pXnhBjNG3-tig_ah2kTLHn9hJ2fcdk4575w70SzwSlDpHycP3FTWv5S2UWxqOkJDrE0hVnPP-jMNqmSnKLOKbTL1bvsfjK-u54GXQWFAKIwnAepV6CElQgjlELXwYnQCB-BULnXFp0RC8Ioa20CiLIVgPMAOMMdXo_xSO2xQVmVbp9xY6TTCG6TJPeRhCiJvJG5FuCVzqNEDplYyi97bYkyMnIwUORZI_Lsh8iH7Irk3HcnpuumAfWfdfrP_tL_kJ21Wsq6yVf_NtzBfwx3yNba-AGKQjtig_nbwh2z1douTpov8BMsoN07 |
| link.rule.ids | 230,315,782,786,866,887,2106,27933,27934 |
| linkProvider | Directory of Open Access Journals |
| openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Evaluation+of+linear+polymerization+shrinkage%2C+flexural+strength+and+modulus+of+elasticity+of+dental+composites&rft.jtitle=Materials+research+%28S%C3%A3o+Carlos%2C+S%C3%A3o+Paulo%2C+Brazil%29&rft.au=Monteiro%2C+Gabriela+Queiroz+de+Melo&rft.au=Montes%2C+Marcos+Antonio+Japiass%C3%BA+Resende&rft.date=2010-03-01&rft.pub=ABM%2C+ABC%2C+ABPol&rft.issn=1980-5373&rft.volume=13&rft.issue=1&rft.spage=51&rft.epage=55&rft_id=info:doi/10.1590%2FS1516-14392010000100012&rft.externalDocID=S1516_14392010000100012 |
| thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=1516-1439&client=summon |
| thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=1516-1439&client=summon |
| thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=1516-1439&client=summon |