General Features of Catalytic Upgrading of Karmalskoe Heavy Oil in the Presence of Amorphous Aluminosilicates

• Published in: Petroleum chemistry Vol. 60; no. 3; pp. 384 - 391
• Main Authors: Sviridenko, N. N., Vosmerikov, A. V., Agliullin, M. R., Kutepov, B. I.
• Format: Journal Article
• Language: English
• Published: Moscow Pleiades Publishing 01-03-2020; Springer; Springer Nature B.V
• Subjects: Additives; Aluminosilicates; Aluminum; Aluminum silicates; Asphaltenes; Atomic properties; Autoclaving; Catalysts; Chemistry; Chemistry and Materials Science; Coking; Condensates; Industrial Chemistry/Chemical Engineering; Pore size; Porosity; Silicon; amorphous aluminosilicate; conversions; resins; heavy oil; asphaltenes; hydrocarbons
• ISSN: 0965-5441; 1555-6239
• DOI: 10.1134/S0965544120030214

The effect of various amorphous aluminosilicates on the composition of cracking products of Karmalskoe heavy oil (Republic of Tatarstan) in an autoclave reactor has been studied. It has been shown that additives of 0.5% aluminosilicates with a pore size of 70 Å and 1.0 wt % Al–Si with a pore size of 50 Å lead to an increase in the degradation of macromolecular components by 13–14% and the yield of fractions boiling below 360°C by more than 20 wt %. It has been revealed that the oils are enriched in saturated and monoaromatic hydrocarbons. It has been found that the addition of an amorphous aluminosilicate with a pore size of 50 Å leads to the formation of asphaltenes with a coke-like structure and a low H/C atomic ratio of 0.75 and to complete catalyst coking. The use of an amorphous aluminosilicate with a pore size of 70 Å leads to the formation of asphaltenes with a lower molecular weight and an H/C atomic ratio of 0.96; in this case, the catalyst is less susceptible to the deposition of condensation products.