Low propagation loss in a one-port SAW resonator fabricated on single-crystal diamond for super-high-frequency applications

• Published in: IEEE transactions on ultrasonics, ferroelectrics, and frequency control Vol. 60; no. 5; pp. 986 - 992
• Main Authors: Fujii, Satoshi, Odawara, Tatsuya, Yamada, Haruya, Omori, Tatsuya, Hashimoto, Ken-ya, Torii, Hironori, Umezawa, Hitoshi, Shikata, Shinichi
• Format: Journal Article
• Language: English
• Published: United States IEEE 01-05-2013
• Subjects: Admittance; Atomic measurements; Diamond; Grain size; Propagation losses; Resonant frequency; Substrates
• ISSN: 0885-3010; 1525-8955
• DOI: 10.1109/TUFFC.2013.2656

Diamond has the highest known SAW phase velocity, sufficient for applications in the gigahertz range. However, although numerous studies have demonstrated SAW devices on polycrystalline diamond thin films, all have had much larger propagation loss than single-crystal materials such as LiNbO 3 . Hence, in this study, we fabricated and characterized one-port SAW resonators on single-crystal diamond substrates synthesized using a high-pressure and high-temperature method to identify and minimize sources of propagation loss. A series of one-port resonators were fabricated with the interdigital transducer/ AlN/diamond structure and their characteristics were measured. The device with the best performance exhibited a resonance frequency f of 5.3 GHz, and the equivalent circuit model gave a quality factor Q of 5509. Thus, a large fQ product of approximately 2.9 × 10 13 was obtained, and the propagation loss was found to be only 0.006 dB/wavelength. These excellent properties are attributed mainly to the reduction of scattering loss in a substrate using a single-crystal diamond, which originated from the grain boundary of diamond and the surface roughness of the AlN thin film and the diamond substrate. These results show that single-crystal diamond SAW resonators have great potential for use in low-noise super-high-frequency oscillators.