Evaluation of flow accelerated corrosion by coupled analysis of corrosion and flow dynamics. Relationship of oxide film thickness, hematite/magnetite ratio, ECP and wall thinning rate

• Published in: Nuclear engineering and design Vol. 241; no. 11; pp. 4585 - 4593
• Main Authors: Uchida, Shunsuke, Naitoh, Masanori, Okada, Hidetoshi, Uehara, Yasushi, Koshizuka, Seiichi
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01-11-2011
• ISSN: 0029-5493; 1872-759X
• DOI: 10.1016/j.nucengdes.2010.09.018

Systematic approaches to evaluate flow accelerated corrosion (FAC) are desired before discussing application of countermeasures for FAC. First, future FAC occurrence should be evaluated to identify locations where a higher possibility of FAC occurrence exists, and then, wall thinning rate at the identified FAC occurrence zone is evaluated to obtain the preparation time for applying countermeasures.
Wall thinning rates were calculated with two coupled models:
1.
static electrochemical analysis and
2.
dynamic oxide layer growth analysis.
The anodic current density and the electrochemical corrosion potential (ECP) were calculated with the static electrochemistry model based on an Evans diagram. The ferrous ion release rate, determined by the anodic current density, was applied as input for the dynamic double oxide layer model. Some of the dissolved ferrous ion was removed to the bulk water and others precipitated on the surface as magnetite particles.
The thickness of oxide layer was calculated with the dynamic oxide layer growth model and then its value was used as input in the electrochemistry model. It was confirmed that the calculated results (corrosion rate and ECP) based on the coupled models were in good agreement with the measured ones.
Higher ECP was essential for preventing FAC rate. Moderated conditions due to lower mass transfer coefficients resulted in thicker oxide layer thickness and then higher ECP, while moderated corrosion conditions due to higher oxidant concentrations resulted in larger hematite/magnetite rate and then higher ECP.