Investigation on microstructure and impact toughness of simulated heat affected zone of high strength low alloy steels by laser-arc hybrid welding

• Published in: Materials research express Vol. 9; no. 9; pp. 96519 - 96528
• Main Authors: Bao, Liangliang, Huang, Yiping, Liu, Fujian, Xu, Yanhong, Ouyang, Kai, Han, Tao
• Format: Journal Article
• Language: English
• Published: Bristol IOP Publishing 01-09-2022
• Subjects: Arc welding; Crack initiation; Crack propagation; Electron microscopy; Grain size; Heat affected zone; High strength low alloy steels; Impact strength; Impact tests; Laser beam welding; laser-arc hybrid welding; Microscopy; Microstructure; microstructure controlling unit; Optical microscopy; Propagation; simulated heat affected zone; Structural analysis; Thermal simulation; toughness
• ISSN: 2053-1591; 2053-1591
• DOI: 10.1088/2053-1591/ac93e9

Abstract
The microstructure and impact toughness of the simulated heat affected zone (HAZ) of a high strength low alloy steels by laser-arc hybrid welding (LAHW) were investigated in this paper. Homogeneous simulated HAZ specimens with different grain sizes were prepared using the welding thermal simulating technique. Instrumented impact test was conducted to investigate the toughness of the simulated HAZ. Multi-scale sub-structure characterization of the simulated HAZ specimens was implemented by optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron back-scattered diffraction (EBSD). The instrumented impact test found that the peak temperature
T
M
mainly affected the crack propagation process, the crack propagation energy
E
p
decreased as the increase of
T
M
, while the crack initiation energy
E
i
barely changed, the decrease of crack stable energy
E
a
led to the change of
E
p
. The multi-scale sub-structure characterization showed that the prior austenite grain size (PAGS), packet width, block width both increased with the rise of
T
M
. The block width was similar to the facet size in the crack unstable propagation zone of the simulated HAZ specimens. The block was the microstructure unit controlling the crack propagation process of the LAHW simulated HAZ specimens.