UV-transparent fluoropolymer fiber coating for the inscription of chirped Bragg gratings arrays

• Published in: Optics and laser technology Vol. 89; pp. 173 - 178
• Main Authors: Tokarev, Alexey V., Anchutkin, Gordey G., Varzhel, Sergey V., Gribaev, Alexey I., Kulikov, Andrey V., Meshkovskiy, Igor K., Rothhardt, Manfred, Elsmann, Tino, Becker, Martin, Bartelt, Hartmut
• Format: Journal Article
• Language: English
• Published: Kidlington Elsevier Ltd 01-03-2017; Elsevier BV
• Subjects: Arrays; Birefringent optical fiber; Bragg gratings; Chlorotrifluoroethylene; Cladding; Coating; Copolymers; Density; Excimer laser; Fiber Bragg grating; Fiber coatings; Fiber optic interferometers; Fibers; Fluoropolymer; Fluoropolymers; Gratings (spectra); Interferometers; Lasers; Optical fibers; Parameter identification; Reflectance; Studies; Two-beam chirped phase mask interferometer; UV-transparent optical fiber coating; Vinylidene; Vinylidene fluoride; UV-transparent optical fiber coating; Fiber Bragg grating; Fluoropolymer; Excimer laser; Two-beam chirped phase mask interferometer; Birefringent optical fiber
• ISSN: 0030-3992; 1879-2545
• DOI: 10.1016/j.optlastec.2016.10.012

A fluoropolymer optical fiber coating based on the thermoplastic copolymer of chlorotrifluoroethylene and vinylidene fluoride is presented. Such coatings can be used as a UV-transparent material for writing single Bragg gratings or arrays of chirped fiber Bragg gratings directly through the fiber coating with the use of excimer laser radiation at 248nm. As an optimum radiation density that does not lead to significant degradation of the fluoropolymer coating, an exposure time not exceeding 200s with a 10Hz laser pulses repetition rate at 70mJ/cm2 was identified. With such inscription parameters it was possible to inscribe arrays of fiber Bragg gratings in hydrogen-loaded birefringent optical fiber with an elliptical stress cladding through a 12µm thick coating, so that stripping of the coating is avoided and good mechanical strength is preserved. The reflection spectrum width of the chirped Bragg gratings was about 3.5nm with a reflectance coefficient of the most effective grating of up to 38%. Such Bragg grating arrays are especially interesting as reflective elements in fiber interferometers.
•UV-transparent fluoropolymer optical fiber coating was presented.•Arrays of chirped fiber Bragg gratings were inscribed through the fiber coating.•Optimum conditions of gratings inscription through the fiber coating were found.