Architectural bone parameters and the relationship to titanium lattice design for powder bed fusion additive manufacturing

• Published in: Additive manufacturing Vol. 47; p. 102273
• Main Authors: McGregor, Martine, Patel, Sagar, McLachlin, Stewart, Mihaela Vlasea
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01-11-2021
• Subjects: Additive manufacturing; Bone micro-architecture; Orthopaedic design and bone replacement; Powder bed fusion; Ti-6Al-4V and Titanium; Powder bed fusion; Bone micro-architecture; Additive manufacturing; Ti-6Al-4V and Titanium; Orthopaedic design and bone replacement
• ISSN: 2214-8604; 2214-7810
• DOI: 10.1016/j.addma.2021.102273

Additive manufacturing (AM) of titanium (Ti) and Ti-6Al-4V lattices has been proposed for bone implants and augmentation devices. Ti and Ti-6Al-4V have favourable biocompatibility, corrosion resistance and fatigue strength for bone applications; yet, the optimal parameters for Ti-6Al-4V lattice designs corresponding to the natural micro- and meso-scale architecture of human trabecular and cortical bone are not well understood. A comprehensive review was completed to compare the natural lattice architecture properties in human bone to Ti and Ti-6Al-4V lattice structures for bone replacement and repair. Ti and Ti-6Al-4V lattice porosity has varied from 15% to 97% with most studies reporting a porosity between 50% and 70%. Cortical bone is roughly 5–15% porous and lattices with 50–70% porosity are able to achieve comparable stiffness, compressive strength, and yield strength. Trabecular bone has a reported porosity range from 70% to 90%, with trabecular thickness varying from 120 to 200 μm. Existing powder bed fusion technologies have produced strut and wall thicknesses ranging from 200 to 1669 μm. This suggests limited overlap between current AM of Ti and Ti-6Al-4V lattice structures and trabecular bone architecture, indicating that replicating natural trabecular bone parameters with latticing is prohibitively challenging. This review contributes to the body of knowledge by identifying the correspondence of Ti and Ti-6Al-4V lattices to the natural parameters of bone microarchitectures, and provides further guidance on the design and AM recommendations towards addressing recognized performance gaps with powder bed fusion technologies.