Heat Transfer of Oil/MWCNT Nanofluid Jet Injection Inside a Rectangular Microchannel

• Published in: Symmetry (Basel) Vol. 11; no. 6; p. 757
• Main Authors: Jalali, Esmaeil, Ali Akbari, Omid, Sarafraz, M. M., Abbas, Tehseen, Safaei, Mohammad Reza
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01-06-2019
• Subjects: Boundary conditions; Boundary layers; Computational fluid dynamics; Finite volume method; Fluid flow; Fluid jets; Heat transfer; Investigations; laminar flow; Laminar heat transfer; Low temperature; microchannel; Microchannels; Nanofluids; Nanoparticles; Nusselt number; Oil/MWCNT nanofluid; Reynolds number; Slip; slip coefficient; Temperature distribution; Velocity
• ISSN: 2073-8994; 2073-8994
• DOI: 10.3390/sym11060757

In the current study, laminar heat transfer and direct fluid jet injection of oil/MWCNT nanofluid were numerically investigated with a finite volume method. Both slip and no-slip boundary conditions on solid walls were used. The objective of this study was to increase the cooling performance of heated walls inside a rectangular microchannel. Reynolds numbers ranged from 10 to 50; slip coefficients were 0.0, 0.04, and 0.08; and nanoparticle volume fractions were 0–4%. The results showed that using techniques for improving heat transfer, such as fluid jet injection with low temperature and adding nanoparticles to the base fluid, allowed for good results to be obtained. By increasing jet injection, areas with eliminated boundary layers along the fluid direction spread in the domain. Dispersing solid nanoparticles in the base fluid with higher volume fractions resulted in better temperature distribution and Nusselt number. By increasing the nanoparticle volume fraction, the temperature of the heated surface penetrated to the flow centerline and the fluid temperature increased. Jet injection with higher velocity, due to its higher fluid momentum, resulted in higher Nusselt number and affected lateral areas. Fluid velocity was higher in jet areas, which diminished the effect of the boundary layer.