Three-Jet Powder Flow and Laser–Powder Interaction in Laser Melting Deposition: Modelling Versus Experimental Correlations

• Published in: Metals (Basel ) Vol. 10; no. 9; p. 1113
• Main Authors: Mahmood, Muhammad Arif, Popescu, Andrei C., Oane, Mihai, Ristoscu, Carmen, Chioibasu, Diana, Mihai, Sabin, Mihailescu, Ion N.
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01-09-2020
• Subjects: 3D printing; Additive manufacturing; Attenuation; attenuation ratio; Boiling points; Computer simulation; controlled phase transformation; Correlation analysis; Deposition; Energy; Flow velocity; Flux density; Gaussian beams (optics); Gaussian process; Heating; Laser beam melting; laser melting deposition; Lasers; Mathematical analysis; Mathematical models; Normal distribution; Nozzles; powder stream distribution; Simulation; Substrates; Temperature distribution
• ISSN: 2075-4701; 2075-4701
• DOI: 10.3390/met10091113

Powder flow and temperature distribution are recognized as essential factors in the laser melting deposition (LMD) process, which affect not only the layer formation but also its characteristics. In this study, two mathematical models were developed. Initially, the three-jet powder flow in the Gaussian shape was simulated for the LMD process. Next, the Gaussian powder flow was coaxially added along with the moving laser beam to investigate the effect of powder flow on temperature distribution at the substrate. The powder particles’ inflight and within melt-pool heating times were controlled to avoid vapors or plasma formation due to excessive heat. Computations were carried out via MATLAB software. A high-speed imaging camera was used to monitor the powder stream distribution, experimentally, while temperature distribution results were compared with finite element simulations and experimental analyses. A close correlation was observed among analytical computation, numerical simulations, and experimental results. An investigation was conducted to investigate the effect of the focal point position on powder stream distribution. It was found that the focal point position plays a key role in determining the shape of the powder stream, such that an increment in the distance from the focus point will gradually transform the powder stream from the Gaussian to Transition, and from the Transition to Annular streams. By raising the powder flow rate, the attenuation ratio prevails in the LMD process, hence, decreasing the laser energy density arriving at the substrate. The computations indicate that, if the particle’s heating temperature surpasses the boiling point, a strong possibility exists for vapors and plasma formation. Consequently, an excessive amount of laser energy is absorbed by the produced vapors and plasma, thus impeding the deposition process.