Oxidation Behavior of Welded Fe-Based and Ni-Based Alloys in Supercritical CO2

• Published in: Oxidation of metals Vol. 97; no. 1-2; pp. 123 - 139
• Main Authors: Oleksak, Richard P., Carney, Casey S., Teeter, Lucas, Doğan, Ömer N.
• Format: Journal Article
• Language: English
• Published: New York Springer US 01-02-2022; Springer Nature B.V
• Subjects: Austenitic stainless steels; Base metal; Carburization (corrosion); Carburizing; Chemistry and Materials Science; Chromium; Corrosion and Coatings; Creep strength; Dissimilar metals; Dual phase steels; Ferritic stainless steels; Grain size; Grain structure; Inorganic Chemistry; Iron; Martensitic stainless steels; Materials Science; Metallic Materials; Nickel base alloys; Original Paper; Oxidation; Recrystallization; Scale (corrosion); Superalloys; Tribology; Welded joints; Cr-rich oxide; Steel oxidation; Gas tungsten arc welding; Recrystallization; Supercritical CO; Carburization
• ISSN: 0030-770X; 1573-4889
• DOI: 10.1007/s11085-021-10080-5

Next-generation supercritical CO
2
(sCO
2
) power cycles will require different classes of alloy throughout the operational temperatures to optimize tradeoff of creep strength, oxidation performance and cost. This will necessitate joining methods such as welding, which might pose compatibility concerns at the joined interfaces. In this study, similar and dissimilar metal welds were generated from a variety of candidate alloys for sCO
2
systems including ferritic/martensitic steels, austenitic steels, and Ni-based superalloys. Samples were extracted from different regions of the welds and exposed to sCO
2
at 550 °C and 20 MPa for 2500 h and then characterized to understand their behavior in this environment. Unsurprisingly, the local oxidation behavior was largely dictated by the Cr content in the underlying metal. High-Cr austenitic steels and Ni alloys formed slow-growing Cr-rich oxide scales with minimal carburization of the underlying metal, while low-Cr ferritic/martensitic steels formed fast-growing Fe-rich oxide scales with significant carburization. Most welds did not show any unusual oxidation behavior at the interfaces, considering the local Cr content. The one exception was the 347H similar metal weld, where a larger grain size and complex grain structure in the fusion zone led to a significantly higher rate of Fe-rich oxide nodule formation compared to the base metal. This suggests that microstructural changes at joined interfaces can play an important role on the oxidation-limited lifetimes in future sCO
2
systems. The composition changes across the interfaces enabled study of the effect of Fe on the growth rate of Cr-rich oxides and of the origins of the subsurface recrystallization zone that forms beneath them.