Dual-threshold control architecture for improved thermal and power management in open-cathode direct methanol fuel cell

• Published in: Energy conversion and management. X Vol. 23; p. 100621
• Main Authors: Alyousef, Zuhair, Crisalle, Oscar D.
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01-07-2024; Elsevier
• Subjects: Dual threshold; Schmitt trigger; Standard cascade control; Switching function; Temperature dynamics; Dual threshold; Temperature dynamics; Schmitt trigger; Standard cascade control; Switching function
• ISSN: 2590-1745; 2590-1745
• DOI: 10.1016/j.ecmx.2024.100621

•Dual threshold algorithm improves the electrical performance of methanol fuel cell.•A stable thermal state of the fuel cell is realized using the new control logic.•Meeting load demands via power transfer of fuel cell is enabled with new algorithm.•The proposed algorithm facilitates optimization of the cell’s power and efficiency.
A new dual-threshold cascade control scheme is proposed for water management in direct methanol fuel cells. The control architecture is constructed with the goal of adjusting the liquid-level of a methanol solution in an internal storage tank, where this control structure is based on a set point constrained by upper and lower thresholds. The logic of the algorithm is driven by a noninverting and an inverting Schmitt triggers comprising a switching function that sets the master controller on manual mode for periods of time during which the operating temperature of the electricity-generating fuel cell’s stack can be fixed at an optimal value. Automatic control is implemented when either threshold is reached, triggering a level recovery action where the temperature is manipulated to promote or inhibit cathodic evaporative water losses, depending on the existing perturbations. Manual mode is reinstated when a chosen mid liquid-level target is reached. The strategy seeks to avoid water flooding and dry-out states in the device, while ensuring constant power and current production during periods of manual operation. Simulation studies show that the new control method is immune to severe perturbations, which stands in contrast to a standard cascade control scheme that causes significant degradation and unstable electrical performance in the cell under analogous conditions. Unlike the standard cascade control where the operating temperature is seldom close to the optimal operating point, the improved dual-threshold logic is superior such that the desired temperature of operation can be realized during the entire manual mode, enhancing the performance of the variables that critically depend on temperature. The new method realizes a successful power transition from 30 to 40W, demonstrating its ability to meet changes in load demands, where this transfer is implemented by altering the operational temperature from 45°C to 60°C at a constant voltage. The new strategy can be incorporated into a higher-level optimization control layer, where different temperature operating points can be chosen based on user-defined performance criteria. The study focuses on a case of two different points of the polarization curve corresponding to a power of 40W. While the operating point at a current of 2.51A and temperature of 57.5°C has a higher voltage efficiency of 10%, the second point operating at 2.79A and 50°C shows a boost by 7.6% in fuel efficiency over the first point. Hence, a user can choose the optimal operating condition based on specific performance metrics while simultaneously meeting the load demands. Few recommendations are presented to advance this work in the future.