Performance and Cost Comparison of Drive Technologies for a Linear Electric Machine Gravity Energy Storage System

• Published in: IEEE access Vol. 12; p. 1
• Main Authors: Mugyema, Morris, Kamper, Maarten J., Wang, Rong-Jie, Sebitosi, Ben A.
• Format: Journal Article
• Language: English
• Published: Piscataway IEEE 01-01-2024; The Institute of Electrical and Electronics Engineers, Inc. (IEEE)
• Subjects: Alternative energy sources; Cost analysis; Costs; Dry gravity; Electric machines; Electric power grids; Energy storage; Gravity; levelized cost of storage; linear machine; optimization; Permanent magnets; Pistons; Power factor; Renewable energy sources; Shafts; Solar energy; Storage management; Windings
• ISSN: 2169-3536; 2169-3536
• DOI: 10.1109/ACCESS.2024.3383161

Energy storage is a crucial technology for facilitating the integration of renewable energy sources (RES), such as wind and solar energy, into the electrical grid. The challenge of maintaining a balance between incoming and outgoing grid power can be effectively addressed by integrating energy storage technologies with inherently intermittent RES. A range of viable options for storing energy from RES currently exists, among which the Linear Electric Machine Gravity Energy Storage System (LEM-GESS) stands out as a promising choice. The LEM-GESS stores energy in a shaft using piston masses based on the concept of gravity. This paper presents the performance and cost analysis of different linear machines employed as the main drive units in a dry gravity energy storage system. Specifically, linear permanent magnet flux switching machines demonstrate the best performance in terms of overall system cost when considering a 20 MW/10MWh system and optimizing for the minimum levelized cost of storage (LCOS). Noteworthy findings reveal that the LEM-GESS cost is highly sensitive to system efficiency, with factors such as material cost and power factor also influencing the LCOS. Designs with modest secondary height, low usage of copper and magnet materials on the primary of the LEM, and a high power factor are preferred to minimize the LCOS. In conclusion, the LEM-GESS with a permanent magnet machine drive option is a highly promising and cost-effective technology for supporting the integration of RES into the grid.