Examination of wavelength dependent soot optical properties of diesel and diesel/rapeseed methyl ester mixture by extinction spectra analysis and LII measurements

• Published in: Applied physics. B, Lasers and optics Vol. 104; no. 2; pp. 253 - 271
• Main Authors: Yon, J., Lemaire, R., Therssen, E., Desgroux, P., Coppalle, A., Ren, K. F.
• Format: Journal Article
• Language: English
• Published: Berlin/Heidelberg Springer-Verlag 01-08-2011
• Subjects: Diesel; Diesel fuels; Engineering; Extinction; Fractal analysis; Lasers; Morphology; Optical Devices; Optics; Photonics; Physical Chemistry; Physics; Physics and Astronomy; Quantum Optics; Soot; Spectra; Wavelengths; Soot Particle; Diesel; Soot Volume Fraction; Diester; Extinction Spectrum
• ISSN: 0946-2171; 1432-0649
• DOI: 10.1007/s00340-011-4416-4

The refractive index of soot is an essential parameter for its optical diagnostics. It is necessary for quantitative interpretation of LII (Laser Induced Incandescence) signals, light scattering or extinction measurements as well as for emissivity calculations. The most cited values have been determined by intrusive methods or without taking into account the soot size distribution and its specific morphology. In the present study, soot generated by the combustion of diesel and diesel/rapeseed methyl ester (RME) mixture (70% diesel and 30% RME) are extensively characterized by taking into account the morphology, the aggregate size distribution, the mass fraction and the spectral dispersion of light. The refractive index
m
for wavelengths
λ
between 300 and 1000 nm is determined for diesel and diester fuels by both in-situ and ex-situ methods. The ex-situ method is based on the interpretation of extinction spectra by taking into account soot sizes and fractal morphology with the RDG-FA (Rayleigh–Debye–Gans for Fractal Aggregate) theory. The in-situ approach is based on the comparison of the LII signals obtained with two different excitation wavelengths. The absorption function
E
(
m
) and the scattering function
F
(
m
) are examined. This study reveals similar optical properties of soot particles generated by both studied fuels even at ambient and flame temperatures. The function
E
(
m
) is shown to reach a maximum for
λ
=250 nm and to tend toward a plateau-like behavior close to
E
(
m
)=0.3 for higher wavelength (600<
λ
 (nm)<1000). The function
F
(
m
) is found to be quite constant for 400<
λ
 (nm)<1000 and equal to 0.31.