Thermomechanical properties of CaCO3-latex pigment coatings: Impact of modified dispersing agents

• Published in: Progress in organic coatings Vol. 76; no. 2-3; pp. 439 - 446
• Main Authors: Touaiti, F., Alam, P., Nilsson, R., Pahlevan, M., Ansell, M.P., Wilén, C.E., Toivakka, M.
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01-02-2013
• Subjects: Copolymerization; Dispersants; Dispersions; DMTA; Latex; Microstructure; MPEG encoders; Particles surface functionalisation; Pigment coatings; Polymer dispersants; Stiffness; Thermomechanical properties; Pigment coatings; Polymer dispersants; Microstructure; DMTA; Particles surface functionalisation
• ISSN: 0300-9440; 1873-331X
• DOI: 10.1016/j.porgcoat.2012.10.026

▸ Particle aggregates are the dominant weakening source in pigment coatings. ▸ Incorporating mPEG chains in the dispersant improves the pigment–latex adhesion. ▸ Dispersing efficiency is dependent on the acrylic acid content. ▸ Latex impact on coating water resistance is prominent compared to dispersing agent.
The effect of CaCO3 pigment surface modifications on the rheology, microstructure and the thermomechanical properties of porous particle–polymer composites are investigated. The incorporation of (random copolymerised) acrylamido-2-methyl-propane sulphonate (AMPS) and ethylene glycol methyl ether (mPEG) into poly(acrylic acid) dispersant reduced the dispersing efficiency. Similarly, the composite microstructure showed the concentration and size of particle aggregates were strongly dependant on the chemical nature of the dispersing agent. Dynamic mechanical thermal analysis (DMTA) showed that the incorporating of mPEG segments within the dispersant chain improves the dispersant-latex compatibility, which results in better adhesion as was confirmed through SEM imaging. The composite storage modulus of dry and water saturated samples showed a strong dependency on the properties of the latex. Composites made of high glass transition temperature (Tg), styrene acrylate (SA) latex exhibited high stiffness in dry samples. Contrarily, the cross-linking of the styrene butadiene latex (SBR) induced a low drop in stiffness under conditions of water saturation.