Processing and characterization of polyethersulfone wet-spun nanocomposite fibres containing multiwalled carbon nanotubes

• Published in: Synthetic metals Vol. 217; pp. 304 - 313
• Main Authors: Bouchard, J., Cayla, A., Odent, S., Lutz, V., Devaux, E., Campagne, C.
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01-07-2016
• Subjects: Annealing; Carbon nanotubes; Dispersion; Electrical; Fibers; Fibres; Heat treatment; Multi wall carbon nanotubes; Polyethersulfone; Properties; Scanning electron microscopy; Semiconductors; Transmission electron microscopy; Polyethersulfone; Fibres; Carbon nanotubes; Heat treatment; Electrical; Properties
• ISSN: 0379-6779; 1879-3290
• DOI: 10.1016/j.synthmet.2016.04.007

[Display omitted]
•Wet spinnability of PES filled with MWCNT.•Influence of annealing treatment on electrical properties.•Analyse of size distribution of MWCNT agglomerate areas in longitudinal axis after thermal annealing with several dispersion time (sonication duration).•Correlation between fiber morphologies and mechanical properties.
Novel semi-conductive fibres from multiwalled carbon nanotubes (MWCNT) based-polyethersulfone (PES) have been produced by wet spinning insight of incorporation in composite matrix. N-methyl-2-pyrrolidone (NMP) was chosen as dispersing medium for MWCNT by sonication and as solvent for PES. MWCNT reinforced-PES fibres were spun into water coagulation bath with an observed instantaneous liquid-liquid demixing. After washing and drying steps, fibres are either directly characterized or annealed at 250°C during 15min and 24h prior to characterization. Scanning electron microscope (SEM) micrographs performed in each configuration disclose presence of macrovoids, pores and empty spaces inside fibres before thermal annealing whereas after thermal annealing, fibres display a cohesive and continuous morphology. A significant mechanical properties improvement of the wet-spun fibres is noticed by rising annealing time. Transmission electron microscope (TEM) investigations have also been carried out and reveal a two phases microstructure in unannealed fibres with a separation between a PES-rich continuous phase and NMP-rich nodules containing exclusively MWCNT. TEM images suggest also thermal annealing process allows solvent evaporation, MWCNT aggregation and a conductive nanofillers network formation in PES nanocomposite fibres. Electrical measurement in unannealed fibres indicate a deficiency of conductive character between 0.25 and 2wt.% MWCNT whereas a lowering electrical percolation threshold is achieved in fibres by increasing annealing time, around 1.5 and 1wt.% MWCNT for respectively a 15min and 24h thermal annealing. Influence of MWCNT sonication duration on electrical conductivity is also examined showing a gradually reduction of fibres' electrical conductivity by dispersion time increasing until losing their semi-conductive state. A dispersion analysis let suppose that a whole MWCNT agglomerates network is split in smaller but denser clusters which are dispersed and taken away from each other during sonication, which causes the conductive path rupture.