Comprehensive characterization of lignocellulosic biomass through proximate, ultimate and compositional analysis for bioenergy production

• Published in: Renewable energy Vol. 103; pp. 490 - 500
• Main Authors: Singh, Yengkhom Disco, Mahanta, Pinakeswar, Bora, Utpal
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01-04-2017
• Subjects: Biofuel; Cellulose; Crystalline index; Lignocellulose biomass; Thermogravimetric analysis; Crystalline index; Biofuel; Lignocellulose biomass; Thermogravimetric analysis; Cellulose
• ISSN: 0960-1481; 1879-0682
• DOI: 10.1016/j.renene.2016.11.039

We report here the characterization of five biomass samples (Impereta cylindrica, Eragrostis airoides, Typha angustifolia L., Arundinella khasiana Nees ex Steud, and Echinochloa stagnina (Retz.) P. Beauv) based on the proximate, ultimate and compositional analysis. The biomasses were examined physico-chemically and characterized to understand their compositional and structural properties. The moisture content was found to be highest in Typha angustifolia (13.951%) and lowest in Eragrostis airoides (8.275%). Ash content was seen to be maximum in Arundinella khasiana (8.12%) and minimum in Eragrostis airoides (3.660%). Derivative Thermogravimetric (DTG) peak was observed below 120 °C indicating the loss of water molecules from the biomass. Cellulose degradation occured between 350 °C to 500 °C. The maximum carbon content was visible in Typha angustifolia (52.895%) and minimum in Eragrostis airoides (41.024%). The FTIR spectra showed a range of peaks such as 3450 cm−1, 2860 cm−1, 1668 cm−1, 1175 cm−1, 1097 cm−1, 7872 cm−1, 625 cm−1, 554 cm−1 etc. The cellulose content was found maximum in Eragrostis airoides (43.17%) and minimum in Echinochloa stagnina (24.90%). The results demonstrate that the collected lignocellulosic biomass could be potential candidate for bioethanol production.
•A comprehensive characterization of lignocellulosic biomass was performed.•Eragrostis airoides (43.17%) can be a good feedstock for biofuel production.•Typha angustifolia has higher carbon percentage (52.895%) hence higher heating value (19.6925 MJ/kg).•Documentation of biomass specimen was done for future reference in the form of herbarium.•Study shows that these indigenous biomass sample could be utilised for biofuel production.