Unveiling the Microstructural Features during Compression of a High-Modulus Mg-15Gd-8Y-6Al-0.3Mn Alloy Reinforced by a Large Volume of Al2RE Phases

• Published in: Materials Vol. 17; no. 19; p. 4784
• Main Authors: Feng, Xuhui, Wang, Xiaojun, Xu, Chao, Shi, Hailong, Li, Xuejian, Hu, Xiaoshi, Lu, Zhen, Fan, Guohua
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 29-09-2024; MDPI
• Subjects: Crystallography; Deformation; Dynamic recrystallization; Elastic deformation; elastic modulus; Grain size; hot deformation; Low temperature; Luminous intensity; Magnesium alloys; Magnesium base alloys; Mechanical properties; Microstructure; microstructure evolution; Modulus of elasticity; Nucleation; Oxidation; Phases; Rheological properties; Rheology; Strain hardening; Strain rate; Stress concentration; Temperature; Texture; Germany
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma17194784

Magnesium alloys with a high volume fraction of secondary phases exhibit inferior formability. Therefore, investigating their thermal deformation characteristics is critical for optimizing thermal processing techniques. In this work, isothermal compression experiments were performed on a Mg-15Gd-8Y-6Al-0.3Mn alloy with an elastic modulus of 51.3 GPa with a substantial volume of aluminum-rare earth (Al2RE) phases. The rheological behavior and microstructural evolution of the material were systematically investigated at varying temperatures (350–500 °C) and strain rates (0.001–1.000 s−1). The calculated thermal processing diagram indicates that the unstable region gradually enlarges with increased strain, and all unstable regions appear within the high-strain-rate, low-temperature domain. The ideal thermal processing range of the alloy is 350–500 °C at strain rates ranging from 0.001 to 0.016 s−1. Particle-stimulated nucleation and discontinuous dynamic recrystallization are both verified to be responsible for the recrystallized microstructure of the alloy. The recrystallized grains exhibit a relatively random crystallographic orientation. As recrystallization proceeds, the texture gradually transitions from a typical [0001] texture in the compression direction to a random texture accompanied by decreased texture intensity. This work sheds new light on the thermo-mechanical processing of high-modulus Mg alloys, which could help design suitable processing techniques for related materials.