6G Indoor Network Enabled by Photonics- and Electronics-Based sub-THz Technology

• Published in: Journal of lightwave technology Vol. 40; no. 2; pp. 499 - 510
• Main Authors: Moon, Sang-Rok, Kim, Eon-Sang, Sung, Minkyu, Rha, Hae Young, Lee, Eui Su, Lee, IL-Min, Park, Kyung Hyun, Lee, Joon Ki, Cho, Seung-Hyun
• Format: Journal Article
• Language: English
• Published: New York IEEE 15-01-2022; The Institute of Electrical and Electronics Engineers, Inc. (IEEE)
• Subjects: 6G indoor network; 6G mobile communication; Beam steering; Bit error rate; Broadband; Digital signal processing; Digital signal processors; Downlinking; Electric components; Electronics; Energy consumption; Error analysis; Error correction; Frequency ranges; High-speed optical techniques; high-speed transmission; Microprocessors; Optical amplifiers; Optical components; Optical fiber amplifiers; Optical fibers; Optical modulation; Optical network units; Optical polarization; Photonics; Quadrature amplitude modulation; Quadrature phase shift keying; Signal generation; sub-THz communication; sub-THz link; Terahertz frequencies; THz indoor network; Uplinking; Wireless networks
• ISSN: 0733-8724; 1558-2213
• DOI: 10.1109/JLT.2021.3113898

We propose an indoor network with a sub-terahertz- band wireless link for 6G applications. In our proposed indoor network, an optical hub unit (OHU) that controls the entire system is optically linked to THz remote nodes (RNs) over optical distribution fibers. The THz RNs communicate with the user equipment through a sub-THz wireless link. The function of the THz RNs is to provide an interface between the optical link and the sub-THz wireless link. For downlink transmission, a photonics-based sub-THz-band signal generation method is adopted to take advantage of the broadband characteristics of the optical components. An electronics-based sub-THz mixer is also used for uplink transmission because of its cost-effectiveness and low energy consumption. A digital signal processor (DSP) is designed to recover the original transmitted baseband signal. The DSP provides frequency offset compensation over a wide frequency range and reduces the probability of cyclic slip. The performance of the proposed system was investigated experimentally with commercially available optical/electrical components. We demonstrate 100 Gb/s 2.5-m wireless transmission with a 16-quadrature amplitude modulation (16-QAM) signal for configuring the downlink. The optical transmission distance was set to 10 km, and the power penalty measured by optical transmission was negligible. We also investigated the scalability and tunability of the photonics-based sub-THz transmitter to confirm the upgradability of our proposed indoor network to consider future capacity expansion. To establish an uplink, a 25 Gb/s 1.5-m wireless transmission with a quadrature phase shift keying (QPSK) signal was employed. A directly modulated laser was used for cost-effective optical transmission. Unlike downstream transmission, a measured bit error rate (BER) penalty caused by the optical transmission was observed. This is due to the interplay between the frequency chirp of the directly modulated laser and the chromatic dispersion in the fiber. Despite this penalty, BERs less than the soft-decision forward error correction (FEC) threshold (2 × 10 −2 ) with 20% overhead were achieved. We discuss several remaining technical challenges in real-field deployment. These include THz Tx power improvement, photonic integration, reducing form-factor, polarization insensitivity, and automatic beam steering. Our recent efforts to address these issues are also introduced and examined.