A SEMI-RIGOROUS SENSOR MODEL FOR PRECISION GEOMETRIC PROCESSING OF MINI-RF BISTATIC RADAR IMAGES OF THE MOON

• Published in: International archives of the photogrammetry, remote sensing and spatial information sciences. Vol. XLI-B4; pp. 425 - 429
• Main Authors: Kirk, R. L., Barrett, J. M., Wahl, D. E., Erteza, I., Jackowatz, C. V., Yocky, D. A., Turner, S., Bussey, D. B. J., Paterson, G. W.
• Format: Journal Article
• Language: English
• Published: 01-01-2016
• ISSN: 2194-9034; 2194-9034
• DOI: 10.5194/isprsarchives-XLI-B4-425-2016

The spaceborne synthetic aperture radar (SAR) instruments known as Mini-RF were designed to image shadowed areas of the lunar poles and assay the presence of ice deposits by quantitative polarimetry. We have developed radargrammetric processing techniques to enhance the value of these observations by removing spacecraft ephemeris errors and distortions caused by topographic parallax so the polarimetry can be compared with other data sets. Here we report on the extension of this capability from monostatic imaging (signal transmitted and received on the same spacecraft) to bistatic (transmission from Earth and reception on the spacecraft) which provides a unique opportunity to measure radar scattering at nonzero phase angles. In either case our radargrammetric sensor models first reconstruct the observed range and Doppler frequency from recorded image coordinates, then determine the ground location with a corrected trajectory on a more detailed topographic surface. The essential difference for bistatic radar is that range and Doppler shift depend on the transmitter as well as receiver trajectory. Incidental differences include the preparation of the images in a different (map projected) coordinate system and use of “squint” (i.e., imaging at nonzero rather than zero Doppler shift) to achieve the desired phase angle. Our approach to the problem is to reconstruct the time-of-observation, range, and Doppler shift of the image pixel by pixel in terms of rigorous geometric optics, then fit these functions with low-order polynomials accurate to a small fraction of a pixel. Range and Doppler estimated by using these polynomials can then be georeferenced rigorously on a new surface with an updated trajectory. This “semi-rigorous” approach (based on rigorous physics but involving fitting functions) speeds the calculation and avoids the need to manage both the original and adjusted trajectory data. We demonstrate the improvement in registration of the bistatic images for Cabeus crater, where the LCROSS spacecraft impacted in 2009, and describe plans to precision-register the entire Mini-RF bistatic data collection.