CFD analysis of natural convection cooling of the in-vessel components during a shutdown of the EU DEMO fusion reactor

• Published in: Fusion engineering and design Vol. 165; p. 112252
• Main Authors: Zappatore, Andrea, Froio, Antonio, Spagnuolo, Gandolfo Alessandro, Zanino, Roberto
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01-04-2021
• Subjects: CFD; Conjugate heat transfer; DEMO; In-vessel component; Natural convection; Remote handling; CFD; In-vessel component; Conjugate heat transfer; Natural convection; DEMO; Remote handling
• ISSN: 0920-3796; 1873-7196
• DOI: 10.1016/j.fusengdes.2021.112252

•Analysis of the cooldown of an EU DEMO sector.•3D transient CFD analysis of the Conjugate Heat Transfer problem.•Detailed model including half of the Plasma Chamber.•Timing needed to allow intervention of Remote Handling identified.
In view of the large neutron fluence expected in a fusion power plant, the maintenance of the in-vessel components (IVC) must be carried out using Remote Handling (RH); however, before the RH robots can intervene, the temperature of the IVCs must be reduced, so a cooldown phase is required after the reactor shutdown before maintenance activities can start. In the EU DEMO two options are being investigated to cool down the Breeding Blanket (BB) structures before maintenance, namely introducing fans to pump air in forced convection in the plasma chamber (after opening the Vacuum Vessel), or letting the air at room temperature cool down the structures by natural convection; if the required downtime is acceptable, the second option is clearly preferred, as it would reduce the cost and complexity of the system. This work analyses the natural convection option via a 3D transient Computational Fluid-Dynamics (CFD) conjugate heat transfer model, to evaluate the required time to cool down the BB.