Experimental investigation of thermo-physical properties, heat transfer, pumping power, entropy generation, and exergy efficiency of nanodiamond + Fe3O4/60:40% water-ethylene glycol hybrid nanofluid flow in a tube

• Published in: Thermal science and engineering progress Vol. 21; p. 100799
• Main Authors: Syam Sundar, L., Mesfin, Solomon, Venkata Ramana, E., Said, Zafar, Sousa, António C.M.
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01-03-2021
• Subjects: Entropy generation; Exergy; Heat transfer; Hybrid nanoparticles; Thermal performance factor; Thermal performance factor; Hybrid nanoparticles; Exergy; Heat transfer; Entropy generation
• ISSN: 2451-9049; 2451-9049
• DOI: 10.1016/j.tsep.2020.100799

•Entropy and exergy efficiency of nanodiamond + Fe3O4/60:40% W/EG hybrid nanofluids were analyzed.•Maximum thermal conductivity is enhanced to 12.79% at 0.2 vol% at T = 60 °C.•Nusselt number is enhanced to 15.65% at 0.2% and at Re = 7505.•Thermal entropy generation is reduced to 20% and frictional entropy generation is increased to 272.48% at 0.2% and at Re 7505.•Exergy efficiency is increased to 38.24% at 0.2 vol % and at Re = 7505.
The synthesis method of in-situ/chemical co-precipitation was implemented for the addition of Fe3O4 nanoparticles on the surface of nanodiamond (ND) nanoparticles, and it is characterized by using x-ray diffraction, transmission electron microscopy and the magnetic property was estimated from the vibrating sample magnetometer. The 60:40% water-ethylene glycol mixture is used as a base fluid for the preparation of ND-Fe3O4 hybrid nanofluids. Experimental techniques are used to measure the thermophysical properties at various particle volume loadings, and temperatures and the obtained data is validated with literature data. The heat transfer, friction factor, and pumping power are evaluated at particle volume loadings from 0.05% to 0.2% and in the Reynolds number range from 2105 to 8126. The concepts of the second law of thermodynamics are used to evaluate the thermal entropy generation, frictional entropy generation and exergy efficiency of the hybrid nanofluids. The thermal conductivity enhancements are 5.03% and 12.79%, whereas, the viscosity enhancements are 108% and 50.84% at particle loading of 0.2% at temperatures of 20 °C and 60 °C in comparison with base fluid. The Nusselt number is augmented to 15.65%; thermal entropy generation is reduced to 20%, frictional entropy generation is augmented to 272.48% and exergy efficiency is increased to 38.24% with a maximum penalty in friction factor of 1.128-times at 0.2% particle loading and a Reynolds number of 7502 against base fluid data. New equations are modelled to evaluate the thermophysical properties, Nusselt number, and friction factor.