Design of Automatic Flood Control System in Kulon Progo, Special Region of Yogyakarta, Indonesia

• Published in: Results in engineering Vol. 23; p. 102620
• Main Authors: Adityawan, Mohammad Bagus, Rianto, Ahmad, Afif, Farhan, Indrawanto, Farid, Mohammad, Kuntoro, Arno Adi, Widyaningtias, Kardhana, Hadi, Yakti, Bagus Pramono, Kusumastuti, Dyah
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01-09-2024; Elsevier
• Subjects: Arduino; Automation; Flood; PLC; Polder; Automation; Flood; Arduino; PLC; Polder
• ISSN: 2590-1230; 2590-1230
• DOI: 10.1016/j.rineng.2024.102620

The construction of Yogyakarta International Airport has resulted in land use changes and increased the topography in the area by up to 9 m, which has led to potential flooding. A spatial analysis was conducted on the flow direction after the airport's construction, specifically in the West Carik watershed. It was discovered that the flow direction was uncertain and trapped upstream of the airport. A polder system with automation is proposed as a solution to the drainage problem. An automation system is designed for pump operation with the objective of improving efficiency. The system is expected to reduce the volume of water in the polder by reducing human involvement and providing ease in monitoring. The results of hydrological analysis with a 50-year return period flood resulted in a design flood discharge of 11.73 m3/s. The polder has a storage capacity of 63,312 m3, a depth of 4 m, and a surface area of 1.58 ha. It requires a total pump capacity of 8.4 m3/s, consisting of three pump units, with one unit having a capacity of 1.8 m3/s and two units with 3.3 m3/s. One additional pump with a capacity of 3.3 m3/s is also planned as a backup pump. The pump automation system simulation employs an Arduino UNO as the controller, water level sensor, and relay. This system successfully fulfills the desired operational system for the pump. In the actual implementation, a Programmable Logic Controller (PLC) is required as the controller, with water level sensors, relays, and contactors as inputs and outputs.
•Conduct hydrological and hydraulics analysis for flood control polder planning.•Determine the pump operation system for the flood control polder.•Design a pump automation system for flood control polder using Arduino.