High-Resolution Chipless Tag RF Sensor

• Published in: IEEE transactions on microwave theory and techniques Vol. 68; no. 11; pp. 4855 - 4864
• Main Authors: Abbasi, Zahra, Baghelani, Masoud, Daneshmand, Mojgan
• Format: Journal Article
• Language: English
• Published: New York IEEE 01-11-2020; The Institute of Electrical and Electronics Engineers, Inc. (IEEE)
• Subjects: Acetone; Amplification; Amplifier design; Bipolar transistors; Deionization; Emitters; Feedback amplifiers; Feedback loops; Gain; Lab-on-a-chip; Microfluidics; Microwave amplifiers; microwave oscillator; Microwave transistors; noninvasive sensor; Oscillators; Q factors; Radio frequency; radio frequency (RF) tag; Resonance; Resonant frequency; Resonators; Sensitivity; Sensors; wireless sensing
• ISSN: 0018-9480; 1557-9670
• DOI: 10.1109/TMTT.2020.3014653

In this article, a new coupled structure based on microwave planar resonators is proposed to demonstrate the capability of ultrahigh quality factor performance using a chipless passive resonator. The platform is based on two passive split-ring resonators (SRRs), one as a reader, and the other one as the tag. The reader resonator is designed to operate at 2.6-GHz resonance frequency and is coupled to an active feedback loop with a microwave amplifier to compensate for the resonator's loss and increase the loaded quality factor of the response. The bandwidth of the feedback amplifier is modified such that the amplifier's gain is higher at the resonance frequency of the tag than that of the reader by adding a capacitor between emitter and collector of the bipolar junction transistor (BJT) amplifier. The tag is designed at 1.6 GHz and is located at a 2.5-mm vertical distance from the reader. As a result, the overall quality factor of about 75 000 is achieved for the tag performing the sensing. The presented technique provides a great practical solution for highly sensitive, noninvasive, and real-time sensing applications. The proposed sensing tag is integrated with a microfluidic chip to highlight its capability for small volume sensing and lab-on-a-chip applications. The sensitivity potential of the design is verified by detecting the concentration of acetone in deionized water. The average sensitivity of the presented sensor is more than 35 kHz/(1% of acetone concentration variation), which is offering extremely high sensitivity of the structure considering the very small volume of the exposed material under the test and the distance between the sensor and the sample.