Formation of Composite Coatings during Detonation Spraying of Cr3C2

• Published in: Journal of composites science Vol. 7; no. 2; p. 71
• Main Authors: Igor S. Batraev, Vladimir Yu. Ulianitsky, Alexandr A. Shtertser, Dina V. Dudina, Arina V. Ukhina
• Format: Journal Article
• Language: English
• Published: MDPI AG 01-02-2023
• Subjects: acetylene–oxygen mixture; bond strength; chromium carbide; composite coating; detonation spraying; microhardness
• ISSN: 2504-477X
• DOI: 10.3390/jcs7020071

In the current practice of applying carbide-based coatings by thermal spraying, the starting material usually contains a metal binder. However, it is important to study the possibility of spraying binder-free carbides, since the metal components usually reduce the operating temperature and corrosion resistance of cermet coatings. In this work, a powder of chromium carbide, Cr3C2, was sprayed using a CCDS2000 detonation gun. Acetylene–oxygen mixtures C2H2 + kO2 with k varying from 0.8 to 3.0 were used as an energetic material. Due to chemical reactions between Cr3C2 and the detonation products, the coatings were of composite nature (multi-phase materials) with a composition depending on k. At k values in the range from 0.8 to 1.1, along with Cr3C2, the coatings contained chromium carbonitride Cr3N0.4C1.6. In the k range from 1.3 to 2.0, Cr7C3 and Cr were the main components of the coatings. As k was increased to 3.0, along with Cr7C3 and Cr, the CrO and Cr2O3 oxides formed in the coatings. The mechanical properties and wear resistance of the coatings were found to depend on their phase compositions. Coatings produced by detonation spraying of Cr3C2 powder may be useful for increasing the corrosion resistance of machine parts to mineral acids and high-temperature oxidation resistance.