Experimental and Numerical Investigation of Tip Leakage Flows in a Roots Blower

• Published in: Designs Vol. 4; no. 1; p. 3
• Main Authors: Sun, Shuaihui, Singh, Gursharanjit, Kovacevic, Ahmed, Bruecker, Christoph
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01-03-2020
• Subjects: cfd; Compressor rotors; Computational fluid dynamics; Flow control; Flow distribution; Flow velocity; Grid generation (mathematics); Investigations; Leakage; Mathematical models; micro piv; Numerical analysis; Particle image velocimetry; positive displacement machines; Positive displacement pumps; Pressure distribution; Roots; roots blower; Simulation; Three dimensional models; tip leakage flows; Turbulence models; Velocity; Velocity distribution
• ISSN: 2411-9660; 2411-9660
• DOI: 10.3390/designs4010003

Computational fluid dynamics (CFD) can help in understanding the nature of leakage flow phenomena inside the rotary positive displacement machines (PDMs). However, due to the lack of experimental results, the analysis of leakage flows in rotary PDMs by CFD has not yet been fully validated. Particle image velocimetry (PIV) tests with a microscopic lens and phase-lock were conducted to obtain the velocity field around the tip gap in an optical Roots blower. The three-dimensional unsteady CFD model of the Roots blower with the dynamic grids generated by Screw Compressor Rotor Grid Generation (SCORG) was established to predict the gap flow under the same operating conditions. The images obtained by the PIV tests were analyzed and some factors which compromise the quality of test results in the gap flow were identified, such as reflections and transparency of the window. The flow fields obtained by CFD have the same flow pattern and velocity magnitude as the experimental results in the majority of observed regions but overestimate the leakage flow velocity. The CFD results show a vortex induced by the leakage flow in the downstream region of the gap. The flow losses in the tip gap mainly happen at the entrance upstream of the gap. Finally, some suggestions for future work are discussed.