Feasibility Study of Recycled Plastic Waste as Fine Aggregate in Concrete

• Published in: E3S web of conferences Vol. 184; p. 1084
• Main Authors: Gopi, K. Sai, Srinivas, Dr. T., Raju V, S. P.
• Format: Journal Article
• Language: English
• Published: EDP Sciences 01-01-2020
• ISSN: 2267-1242; 2267-1242
• DOI: 10.1051/e3sconf/202018401084

Nowadays, Environmental concern towards plastic waste rises because of its low degradability and creating problems like chunking sewer lines, drainages, waterways, filling landfills, health problems, etc. The best approach is recycling and reuses plastic waste. Increase in the production of plastic day by day but, very little was recycled. On the other hand, huge demand for concrete in the construction industry. Utilization of recycled plastic waste in the production of sustainable concrete by partial replacement of fine aggregate. This study has been investigated the utilization of two types of recycled plastic waste Polyethylene Terephthalate (PET) and Polypropylene (PP) as fine aggregate in concrete. M30 grade of concrete has been used by partial replacement of fine aggregate (River Sand) with recycled plastic waste in the percentage of 5, 10, 15, 20, and 25. The workability and compressive strength results are checked to find the acceptable percentage of incorporation of PET and PP in concrete. From the results, it is observed that the workability is decreased as the percentage of recycled plastic waste is increased. The Optimum Percentage of replacement of PET is 10%. PP has shown a marginal reduction in compressive strength for 5% replacement.