Study on Laminar Combustion Characteristics of Ammonia/ Hydrogen Premixed Based on Chemical Reaction Kinetics

• Published in: E3S web of conferences Vol. 406; p. 2031
• Main Authors: Nie, Tao, Zhang, Ping, Yang, Kun, Zhou, Lei, Zheng, Xiangquan, Luo, Li
• Format: Journal Article
• Language: English
• Published: EDP Sciences 01-01-2023
• ISSN: 2267-1242; 2267-1242
• DOI: 10.1051/e3sconf/202340602031

The combustion characteristics of ammonia/hydrogen premixed laminar flow and the effect of hydrogen on the combustion performance of ammonia fuel were studied. First, the corresponding model of ammonia/ hydrogen premixed laminar combustion is established by using GRI3.0 mechanism, Konnov mechanism, Mei mechanism, Okafor mechanism, and Otomo mechanism respectively. Second, the simulation results are compared with the experimental results. It is found that the Mei mechanism and Okafor mechanism are more suitable for ammonia/ hydrogen premixed laminar combustion. On this basis, the effects of equivalent ratio, hydrogen ratio, and initial temperature on laminar flame velocity, maximum combustion temperature, and NO mole fraction were studied. The results show that the laminar flame velocity, the maximum combustion temperature, and the mole fraction of NO first increase and then decrease with the increase of the equivalent ratio, and the laminar flame velocity reaches the maximum when the equivalent ratio is 1.1. At the same time, with the increase of hydrogen ratio and initial temperature, the maximum combustion temperature increases first and then decreases. The mole fraction of NO increased with the increase of hydrogen ratio and initial temperature. The results show that mixing hydrogen in ammonia can improve the combustion characteristics of ammonia.