Isotropic yield surfaces for porous ductile materials: complete geometric representation by a computational homogenisation procedure

• Published in: Engineering computations Vol. 40; no. 4; pp. 737 - 771
• Main Authors: Santos, Wanderson Ferreira dos, Ferreira, Ayrton Ribeiro, Proença, Sergio Persival Baroncini
• Format: Journal Article
• Language: English
• Published: Bradford Emerald Publishing Limited 15-06-2023; Emerald Group Publishing Limited
• Subjects: Boundary conditions; Elastoplasticity; Finite element method; Homogenization; Mathematical morphology; Morphology; Porous materials; Porous media; Representations; Simulation; Strain localization; Three dimensional analysis; Unit cell; Velocity; Yield criteria; Full yield surfaces; Computational homogenisation; Uniform and periodic boundary conditions; Lode angle; Cell morphology
• ISSN: 0264-4401; 1758-7077
• DOI: 10.1108/EC-12-2021-0718

PurposeThe present paper aims to explore a computational homogenisation procedure to investigate the full geometric representation of yield surfaces for isotropic porous ductile media. The effects of cell morphology and imposed boundary conditions are assessed. The sensitivity of the yield surfaces to the Lode angle is also investigated in detail.Design/methodology/approachThe microscale of the material is modelled by the concept of Representative Volume Element (RVE) or unit cell, which is numerically simulated through three-dimensional finite element analyses. Numerous loading conditions are considered to create complete yield surfaces encompassing high, intermediate and low triaxialities. The influence of cell morphology on the yield surfaces is assessed considering a spherical cell with spherical void and a cubic RVE with spherical void, both under uniform strain boundary condition. The use of spherical cell is interesting as preferential directions in the effective behaviour are avoided. The periodic boundary condition, which favours strain localization, is imposed on the cubic RVE to compare the results. Small strains are assumed and the cell matrix is considered as a perfect elasto-plastic material following the von Mises yield criterion.FindingsDifferent morphologies for the cell imply in different yield conditions for the same load situations. The yield surfaces in correspondence to periodic boundary condition show significant differences compared to those obtained by imposing uniform strain boundary condition. The stress Lode angle has a strong influence on the geometry of the yield surfaces considering low and intermediate triaxialities.Originality/valueThe exhaustive computational study of the effects of cell morphologies and imposed boundary conditions fills a gap in the full representation of the flow surfaces. The homogenisation-based strategy allows us to further investigate the influence of the Lode angle on the yield surfaces.