Proposal of Technique for Analysis of Complementary Frequency Selective Surfaces

• Published in: Radio science Vol. 58; no. 10
• Main Authors: da Silva, B. S., Campos, A. L. P. S., Sousa, M. E. T., Silva, M. W. B., Andrade, H. D.
• Format: Journal Article
• Language: English
• Published: Washington Blackwell Publishing Ltd 01-10-2023
• Subjects: Equivalent circuits; Frequency selective surfaces; Optimization; Programming languages; Prototypes; Software
• ISSN: 0048-6604; 1944-799X
• DOI: 10.1029/2022RS007621

A specific class of frequency selective surface (FSS) is the complementary frequency selective surface (CFSS) that has interesting characteristics such as high angular stability, multiple transmission and/or reflection bands, and the possibility of miniaturization. The analysis and design of this sort of structure are commonly performed using commercial software, which demands a high computational effort, impacting a longer optimization time. The equivalent circuit model combined with a cascading technique emerges as an alternative method to the use of these softwares, in the optimization of the physical dimensions of these structures, as they model the behavior of a CFSS with low computational effort and optimization time, in addition to being able to be implemented in various programming languages. Thus, this work proposes a CFSS analysis technique that combines the equivalent circuit method with the ABCD matrix. To the best of our knowledge, this is the first reported research on approximate techniques for CFSS analysis. The chosen geometry was the circular ring, due to high angular stability and polarization independence. The modeling of the equivalent circuit for patch and aperture geometries is presented. Some structures are simulated, and the results are compared with results obtained with the HFSS software. Finally, two prototypes are built to validate the analyses performed.
The CFSS analysis composed of circular rings is performed through the equivalent circuit model combined with the ABCD matrix
The results of the simulated structures are compared with the ones obtained with the commercial software
The simulated prototypes were built and measured to validate the performed analyses